Applied sciences

Archives of Control Sciences


Archives of Control Sciences | 2017 | No 4 |

Download PDF Download RIS Download Bibtex


Abstract In the paper construction of a Lyapunov functional for time delay system with both lumped and distributed delay is presented. The Lyapunov functional is determined by means of the Lyapunov matrix. The method of determination of the Lyapunov matrix for time delay system with both lumped and distributed delay is presented. It is given the example illustrating the method.
Go to article

Authors and Affiliations

Jozef Duda
Download PDF Download RIS Download Bibtex


Abstract This research work proposes a new three-dimensional chaotic system with a hidden attractor. The proposed chaotic system consists of only two quadratic nonlinearities and the system possesses no critical points. The phase portraits and basic qualitative properties of the new chaotic system such as Lyapunov exponents and Lyapunov dimension have been described in detail. Finally, we give some engineering applications of the new chaotic system like circuit simulation and control of wireless mobile robot.
Go to article

Authors and Affiliations

Sundarapandian Vaidyanathan
Aceng Sambas
Mustafa Mamat
Mada Sanjaya Ws
Download PDF Download RIS Download Bibtex


Abstract This paper investigates the problem of adaptive robust simultaneous stabilization (ARSS) of two dissipative Hamiltonian systems (DHSs), and proposes a number of results on the controller parameterization design. Firstly, an adaptive H control design approach is presented by using the dissipative Hamiltonian structural for the case that there are both external disturbances and parametric uncertainties in two DHSs. Secondly, an algorithm for solving tuning parameters of the controller is proposed using symbolic computation. The proposed controller parameterization method avoids solving Hamilton-Jacobi-Issacs (HJI) equations and the obtained controller is easier as compared to some existing ones. Finally, an illustrative example is presented to show that the ARSS controller obtained in this paper works very well.
Go to article

Authors and Affiliations

Zhong Cao
Xiaorong Hou
Wenjing Zhao
Download PDF Download RIS Download Bibtex


Abstract Offset-free model predictive control (MPC) algorithms for nonlinear state-space process models, with modeling errors and under asymptotically constant external disturbances, is the subject of the paper. The main result of the paper is the presentation of a novel technique based on constant state disturbance prediction. It was introduced originally by the author for linear state-space models and is generalized to the nonlinear case in the paper. First the case with measured state is considered, in this case the technique allows to avoid disturbance estimation at all. For the cases with process outputs measured only and thus the necessity of state estimation, the technique allows the process state estimation only - as opposed to conventional approach of extended process-and-disturbance state estimation. This leads to simpler design with state observer/filter of lower order and, moreover, without the need of a decision of disturbance placement in the model (under certain restrictions), as in the conventional approach. A theoretical analysis of the proposed algorithm is provided, under applicability conditions which are weaker than in the conventional approach. The presented theory is illustrated by simulation results of nonlinear processes, showing competitiveness of the proposed algorithms.
Go to article

Authors and Affiliations

Piotr Tatjewski
Download PDF Download RIS Download Bibtex


Abstract This paper presents the dynamically consistent Jacobian inverse for non-holonomic robotic system, and its application to solving the motion planning problem. The system’s kinematics are represented by a driftless control system, and defined in terms of its input-output map in accordance with the endogenous configuration space approach. The dynamically consistent Jacobian inverse (DCJI) has been introduced by means of a Riemannian metric in the endogenous configuration space, exploiting the reduced inertia matrix of the system’s dynamics. The consistency condition is formulated as the commutativity property of a diagram of maps. Singular configurations of DCJI are studied, and shown to coincide with the kinematic singularities. A parametric form of DCJI is derived, and used for solving example motion planning problems for the trident snake mobile robot. Some advantages in performance of DCJI in comparison to the Jacobian pseudoinverse are discovered.
Go to article

Authors and Affiliations

Joanna Ratajczak
Krzysztof Tchoń
Download PDF Download RIS Download Bibtex


Abstract This article presents a control algorithm for nonholonomic mobile manipulators with a simple, geometric holonomic constraint imposed on the robot’s arm. A mathematical model in generalized, auxiliary and linearized coordinates is presented, as well as the constrained dynamics of the robotic system. A position-force control law is proposed, both for the fully known robot’s model, as well as for the model with parametric uncertainty in the dynamics. Theoretical considerations are supported by the results of computer simulations.
Go to article

Authors and Affiliations

Mirela Kaczmarek
Wojciech Domski
Alicja Mazur
Download PDF Download RIS Download Bibtex


Abstract The paper mitigates the existing conditions reported in the previous literature for control design of discrete-time linear positive systems. Incorporating an associated structure of linear matrix inequalities, combined with the Lyapunov inequality guaranteing asymptotic stability of discrete-time positive system structures, new conditions are presented with which the state-feedback controllers and the system state observers can be designed. Associated solutions of the proposed design conditions are illustrated by numerical illustrative examples.
Go to article

Authors and Affiliations

Dušan Krokavec
Anna Filasová

Editorial office

Editor-in-Chief prof. dr hab. inż. Andrzej Świerniak

Deputy/ Managing Editor
Zbigniew Ogonowski, Silesian University of Technology, Gliwice, Poland

Editorial Advisory Board

Andrzej Bargiela, University of Nottingham, UK
Roman Barták, Charles University, Prague, Czech Rep.
Jacek Błażewicz, Poznań University of Technology, Poland
Reggie Davidrajuh, University of Stavanger, Norway
Andreas Deutsch, Technische Universität Dresden, Germany
Moritz Diehl, University of Freiburg, Germany
Władysław Findeisen, Warsaw University of Technology, Poland
Marcelo D.Fragoso, LNCC/MCT, Rio de Janeiro, Brasil
Avner Friedman, MBI Ohio State University, Columbus, USA
Alberto Gandolfi, IASI, Rome, Italy
Ryszard Gessing, Silesian University of Technology, Gliwice, Poland
Henryk Górecki, AGH University of Science and Technology, Poland
David Greenhalgh, University of Strathclyde, Glasgow, UK
Mats Gyllenberg, University of Helsinki, Finland
Wassim M. Haddad, Georigia University, Atlanta, USA
Raimo P. Hämäläinen, Aalto University School of Science, Finland
Alberto Isidori, Università di Roma "La Sapienza" Italia
Laszlo Kevicky, Hungarian Academy of Sciences, Hungary
Marek Kimmel, Rice University Houston, USA
Jerzy Klamka, Silesian University of Technology, Gliwice, Poland
Józef Korbicz, University of Zielona Góra, Poland
Irena Lasiecka, University of Virginia, USA
Urszula Ledzewicz, Southern Illinois University at Edwardsville, USA
Magdi S Mahmoud, KFUM, Dahram, Saudi Arabia
Krzysztof Malinowski, Warsaw University of Technology, Poland
Wojciech Mitkowski, AGH University of Science and Technology, Poland
Bozenna Pasik-Duncan, University of Kansas, Lawrence, USA
Ian Postlethwaite, Newcastle University, Newcastle, UK
Eric Rogers, University of Southampton, UK
Heinz Schaettler, Washington University, St Louis, USA
Ryszard Tadeusiewicz, AGH University of Science and Technology, Poland
Jan Węglarz, Poznań University of Technology, Poland
Liu Yungang, Shandong University, PRC
Valery D. Yurkevich, Novosibirsk State Technical University, Russia


Institute of Automatic Control
Silesian University of Technology
Akademicka 16
44-101 Gliwice, Poland



Instructions for authors

Each paper submitted is subject to a review procedure, and the publication decision is based on reviers' comments on the paper. To avoid delay, please prepare the manuscript carefully following the suggestions listed below.

Computer file of the manuscript may be sent by e-mail to the address of Assistant Editor or Preferred text processors is TeX or LaTeX, however Word and other processors are also acceptable. In case of difficulties in processing the text, the author may be asked to supply the ASCII export of the original file.

Manuscripts sent via ordinary post should be typewritten double-spaced on one side of a standard size (A4) paper. Left side margin should be approximately 3cm (1.2'') wide. Each page should contain approximately 30 lines of 60 characters each. The manuscript including figures and tables together with their captions should be submitted. A separate signed letter giving the Author's preferred address for correspondence and return of proofs should be enclosed. Manuscript is the basis for editorial work.

First page should include the title of the paper, first name(s) and surname(s) of the Author(s), and a short summary (abstract), not longer than 20 lines.

Keywords of max. 5 - 7 items should be included in manuscript.

Numeration. All chapters, including the introduction, should be numbered in arabic numerals. Equations, tables and figures as well as theorems, corollaries, examples etc., should be numbered consecutively throughout the paper in arabic numerals, except in appendices. Appendices should be numbered with capital letters, and numeration should be closed within individual appendices.

If the manuscript is not prepared with TeX, mathematical expressions should be carefully written so as not to arouse confusion. Care should be taken that subscripts and superscripts are easily readable.

Tables and figures should be placed as desired by the Author within the text or on separate sheets with their suggested location indicated by the number of table or figure in the text. Figures, graphs and pictures (referred to as Fig. in the manuscript) should be numbered at the beginning of their caption following the figure. All figures should be prepared as PostScript EPS files or LaTeX picture files; in special cases, bitmaps of figure are also acceptable. The numbers and titles of tables should be placed above the main body of each table.

References should be listed alphabetically at the end of the manuscript. They should be numbered in ascending order and the numbers should be inserted in square brackets. References should be organized as follows. First initial(s), surname(s) of the author(s) and title of article or book. Then, for papers: title of periodical or collective work, volume number (year of issue), issue number, and numbers of the first and the last page; for books: publisher's name(s), place and year of issue. Example:

  1. R. E. Kalman: Mathematical description of linear dynamical system. SIAM J. Control. 1(2), (1963), 152-192.
  2. F. C. Shweppe: Uncertain dynamic systems. Prentice-Hall, Englewood Cliffs, N.J. 1970.

Please, give full titles of journals; only common words like Journal, Proceedings, Conference, etc. may be abbreviated ( to J., Proc., Conf., ... respectively). References to publications in the body of the manuscript should be indicated by the numbers of the adequate references in square brackets. When the paper is set in TeX the preferable form of preparing references is Bib TeX bib database.

Footnotes should be placed in the manuscript, beginning with "Received..." (date to be filled in by Editor), the author's institutional affiliation and acknowledgement of financial support,, and continuing with numbered references. The number of footnotes should be held to a minimum.

List of symbols containing definitions of all symbols used, enclosed to the manuscript on a separate sheet, is required when the paper is not set in TeX and welcome in other cases.

Reprints. 10 reprints of each paper will be provided free of charge.

Submission of a paper implies the Author's irrevocable and exclusive authorization of the publisher to collect any sums or considerations for copying or reproduction payable by third parties.

Fees. No honorarium will be paid. The journal does not have article processing charges (APCs) nor article submission charges

Papers should be sent to:

Zbigniew Ogonowski
Institute of Automatic Control
Silesian University of Technology
Akademicka 16
44-101 Gliwice, Poland

Open Access policy

Archives of Control Sciences jest czasopismem wydawanym w wolnym dostępie na licencji CC BY-NC-ND 3.0.

Archives of Control Sciences is an open access journal with all content available with no charge in full text version. The journal content is available under the licencse CC BY-NC-ND 3.0

This page uses 'cookies'. Learn more