@ARTICLE{Niharika_Niharika_Effects_2016, author={Niharika, Niharika and Agrawal, B.P. and Khan, Iqbal A. and Khan, Zahid A.}, volume={vol. 63}, number={No 4}, journal={Archive of Mechanical Engineering}, pages={531-548}, howpublished={online}, year={2016}, publisher={Polish Academy of Sciences, Committee on Machine Building}, abstract={Titanium alloy (Ti-6Al-4V) has been extensively used in aircraft turbine-engine components, aircraft structural components, aerospace fasteners, high performance automotive parts, marine applications, medical devices and sports equipment. However, wide-spread use of this alloy has limits because of difficulty to machine it. One of the major difficulties found during machining is development of poor quality of surface in the form of higher surface roughness. The present investigation has been concentrated on studying the effects of cutting parameters of cutting speed, feed rate and depth of cut on surface roughness of the product during turning of titanium alloy. Box-Behnken experimental design was used to collect data for surface roughness. ANOVA was used to determine the significance of the cutting parameters. The model equation is also formulated to predict surface roughness. Optimal values of cutting parameters were determined through response surface methodology. A 100% desirability level in the turning process for economy was indicated by the optimized model. Also, the predicted values that were obtained through regression equation were found to be in close agreement to the experimental values.}, type={Artykuły / Articles}, title={Effects of cutting parameters on quality of surface produced by machining of titanium alloy and their optimization}, URL={http://www.journals.pan.pl/Content/104278/PDF/ame-2016-0030.pdf}, doi={10.1515/meceng-2016-0030}, keywords={turning, Titanium alloy, RSM, surface roughness}, }