@ARTICLE{Krawczyk_Piotr_Effect_2016, author={Krawczyk, Piotr and Badyda, Krzysztof and Młynarz, Szczepan}, volume={vol. 37}, number={No 4 December}, journal={Chemical and Process Engineering}, pages={461-471}, howpublished={online}, year={2016}, publisher={Polish Academy of Sciences Committee of Chemical and Process Engineering}, abstract={One of the important parameters describing pneumatic liquid atomisation is the air to liquid mass ratio (ALR). Along with the atomiser design and properties of the liquid it has extremely important influence on parameters of atomised liquid such as: mean droplet diameter, jet range and angle. Knowledge about real characteristics of an atomiser in this respect is necessary to correctly choose its operating parameters in industrial applications. The paper presents results of experimental research of two-fluid atomisers with internal mixing built according to custom design. Investigated atomizers were designed for spraying a urea aqueous solution inside the power boiler combustion chamber. They are an important element of SNCR (selective non-catalytic reduction) installation which is used to reduce nitrogen oxides in a flue gas boiler. Obtained results were used by authors in further research, among others to determine the boundary conditions in the SNCR installation modeling. The research included determining mean droplet diameter as a function of ALR. It has been based on the immersion liquid method and on the use of specialised instrumentation for determining distribution of droplet diameters in a spray – Spraytec by Malvern. Results obtained with both methods were later compared. The measurements were performed at a laboratory stand located at the Institute of Heat Engineering, Warsaw University of Technology. The stand enables extensive investigation of the water atomisation process.}, type={Artykuły / Articles}, title={Effect of the air to water ratio on the performance of internal mixing two-fluid atomiser}, URL={http://www.journals.pan.pl/Content/105902/PDF/01-paper-Krawczyk.pdf}, doi={10.1515/cpe-2016-0038}, keywords={liquid atomisation, internal mixing two-fluid atomisers, mean diameter, SNCR}, }