@ARTICLE{Hawryluk_Marek_Development_2017, author={Hawryluk, Marek and Ziemba, Jacek and Dworzak, Łukasz}, volume={vol. 24}, number={No 4}, journal={Metrology and Measurement Systems}, pages={739–757}, howpublished={online}, year={2017}, publisher={Polish Academy of Sciences Committee on Metrology and Scientific Instrumentation}, abstract={The paper deals with evaluation of a 3D scanning method elaborated by the authors, by applying it to the analysis of the wear of forging tools. The 3D scanning method in the first place consists in the application of scanning to the analysis of changes in geometry of a forging tool by way of comparing the images of a worn tool with a CAD model or an image of a new tool. The method was evaluated in the context of the important measurement problems resulting from the extreme conditions present during the industrial hot forging processes. The method was used to evaluate wear of tools with an increasing wear degree, which made it possible to determine the wear characteristics in a function of the number of produced forgings. The following stage was the use it for a direct control of the quality and geometry changes of forging tools (without their disassembly) by way of a direct measurement of the geometry of periodically collected forgings (indirect method based on forgings). The final part of the study points to the advantages and disadvantages of the elaborated method as well as the potential directions of its further development.}, type={Artykuły / Articles}, title={Development of a Method for Tool Wear Analysis Using 3D Scanning}, URL={http://www.journals.pan.pl/Content/106323/PDF/10.1515-mms-2017-0054-paper%2013.pdf}, doi={10.1515/mms-2017-0054}, keywords={3D scanning, measurements and volumetric analysis of tools wear, improve a durability of forging tools}, }