@ARTICLE{Juraszek_Janusz_Strain_2018, author={Juraszek, Janusz}, volume={vol. 63}, number={No 2}, journal={Archives of Mining Sciences}, howpublished={online}, year={2018}, publisher={Committee of Mining PAS}, abstract={The paper presents a new method for measuring the strain and load of wire ropes guide using fiber optic sensors with Bragg gratings. Its principle consists in simultaneous fiber optic measurement of longitudinal strain of the rope and transverse strain of the bolt fixing the rope. The tensometric force transducers which have been used so far were only able to determine the load in the head securing the rope through an indirect measurement using a special strain insert. They required calibration, compensation of temperature changes, as well as periodic checking and calibration. The head fastening the rope required significant design changes. Measurement based on fiber optic sensors does not have these drawbacks and is characterized by a much higher accuracy and safety of measurements, because the working medium is light. The fastening head does not change. The measurement of the rope load may be based on the change of strain value or indirectly by means of measuring the deflection of the bolt fixing the rope holder. The proposed solution consists in placing the optical fiber with Bragg grating inside the bolt. It enables continuous measurements with a frequency of 2 kHz. A special test bench was built at the Research and Supervisory Centre of Underground Mining. Testing on guide ropes was carried out in a mining hoist in the Piast mine.}, type={Artykuły / Articles}, title={Strain and Force Measurement in Wire Guide}, URL={http://www.journals.pan.pl/Content/106729/PDF/Archiwum-63-2-05-Juraszek.pdf}, doi={10.24425/122450}, keywords={strain, load, wire, fiber optic sensor}, }