@ARTICLE{Cheng_Han-miao_Error_2019, author={Cheng, Han-miao and Wang, Zhong-dong and Cai, Qi-xin and Lu, Xiao-quan and Gao, Yu-xiang and Song, Rui-peng and Tian, Zheng-qi and Mu, Xiao-xing}, volume={vol. 26}, number={No 3}, journal={Metrology and Measurement Systems}, pages={505-516}, howpublished={online}, year={2019}, publisher={Polish Academy of Sciences Committee on Metrology and Scientific Instrumentation}, abstract={The single-phase voltage loss is a common fault. Once the voltage-loss failure occurs, the amount of electrical energy will not be measured, but it is to be calculated so as to protect the interest of the power supplier. Two automatic calculation methods, the power substitution and the voltage substitution, are introduced in this paper. Considering the lack of quantitative analysis of the calculation error of the voltage substitution method, the grid traversal method and MATLAB tool are applied to solve the problem. The theoretical analysis indicates that the calculation error is closely related to the voltage unbalance factor and the power factor, and the maximum calculation error is about 6% when the power system operates normally. To verify the theoretical analysis, two three-phase electrical energy metering devices have been developed, and verification tests have been carried out in both the lab and field conditions. The lab testing results are consistent with the theoretical ones, and the field testing results show that the calculation errors are generally below 0.2%, that is correct in most cases.}, type={Article}, title={Error analysis of the three-phase electrical energy calculation method in the case of voltage-loss failure}, URL={http://www.journals.pan.pl/Content/113094/PDF/05_MMS_3_INTERNET.pdf}, doi={10.24425/mms.2019.129575}, keywords={three-phase electrical energy meter, voltage-loss failure, voltage substitution, three-phase voltage unbalance, calculation error}, }