@ARTICLE{Gašparin_Lovrenc_Cogging_2013, author={Gašparin, Lovrenc and Fišer, Rastko}, volume={vol. 62}, number={No 3 September}, journal={Archives of Electrical Engineering}, pages={449-461}, howpublished={online}, year={2013}, publisher={Polish Academy of Sciences}, abstract={This study presents the dependence of the level and harmonic structure of the cogging torque in permanent magnet synchronous motors (PMSM) to imperfections of permanent magnet (PM) dimensions and positions, which can not be avoided in massproduction. Slightly diverse dimensions and misplacements of PMs are introducing asymmetries in magnetic field distribution which cause additional harmonic components. A finite element method (FEM) and Fast Fourier transform (FFT) were used to calculate cogging torque harmonic components with regard to several combinations of PM assembly imperfections. It has been established and proved that unequal PMs cause magnetic asymmetries which give rise to additional cogging torque harmonic components and consequently increase the total cogging torque. It is also shown that in some particular combinations the influence of an individual PM imprecision could compensate with others due to different phase shifts which can result even in the decrease of cogging torque. Considering presented results it is possible to foresee which additional harmonic components will comprise the cogging torque of mass-produced PMSMs due to PM imperfections. In this way the designers are able to predetermine required manufacturing tolerances to keep the level of cogging torque in a admissible level. Simulation results were verified and confirmed by laboratory tests.}, type={Artykuły / Articles}, title={Cogging torque sensitivity to permanent magnet tolerance combinations}, URL={http://www.journals.pan.pl/Content/84831/PDF/08_paper.pdf}, doi={10.2478/aee-2013-0036}, keywords={cogging torque, finite element method, harmonic components, PM synchronous motor}, }