TY - JOUR N2 - Heat treatment processes, due to qualitative requirements for the cast machinery components and restrictions on energy consumption resulting on the one hand from environmental concerns, and on the other hand from a requirements coming from minimization of manufacturing costs, are resulting in searching after a technologies enabling obtainment of satisfactory results, in form of improved mechanical properties mainly, while minimizing (limiting) parameters of successive operations of the heat treatment. Heat treatment of the T6 type presented in this paper consists in operations of heating of investigated alloys to suitably selected temperature (range of this temperature was evaluated on the base of the ATD method), holding at such temperature for a short time, and next rapid cooling in water (20 oC) followed by artificial ageing, could be such technology in term s of above mentioned understanding of this issue. Performed T6 heat treatment with limited parameters of solutioning operation resulted in visible increase in tensile strength Rm of AlSi7Mg, AlSi7Cu3Mg and AlSi9Cu3(Fe) alloys. L1 - http://www.journals.pan.pl/Content/116493/PDF/AFE%203_2020_15.pdf L2 - http://www.journals.pan.pl/Content/116493 PY - 2020 IS - No 3 EP - 91 DO - 10.24425/afe.2020.133335 KW - Silumins KW - Heat treatment KW - Ultimate tensile strength A1 - Pezda, J. PB - The Katowice Branch of the Polish Academy of Sciences VL - vol. 20 DA - 2020.08.10 T1 - Assessment of T6 Heat Treatment Effectiveness of Hypo-eutectic Silumins with Limited Parameters of Solutioning Treatment SP - 85 UR - http://www.journals.pan.pl/dlibra/publication/edition/116493 T2 - Archives of Foundry Engineering ER -