TY - JOUR N2 - This article focuses on the difficulties in ensuring longwall stability resulting from the wrong geometric form of the structure of powered support sections. The authors proved, based on the in-situ measurements and numerical calculations, that proper cooperation of the support with the rock mass requires correct determination of the support point for the hydraulic legs along the length of the canopy (ratio), as well as the inclination of the shield support of the section of the powered roof support. The lack of these two fundamental elements may lead to roof drops that directly impact the production results and safety of the people working underground. Another matter arising from the incorrect geometric form of the construction are the values of forces created in the node connecting the canopy with the caving shield, which can make a major contribution to limit the practical range of the operational height of the powered roof support (due to interaction of powered support with rockmass) in terms of the operating range offered by the manufacturer of the powered support. The operating of the powered roof support in some height ranges may hinder, or even in certain cases prevent, the operator of powered support, moving the shields and placing them with the proper geometry (ensuring parallelism between the canopy and the floor bases of the section). L1 - http://www.journals.pan.pl/Content/117219/PDF/Archiwum-65-3-06-Rajwa.pdf L2 - http://www.journals.pan.pl/Content/117219 PY - 2020 IS - No 3 EP - 529 DO - 10.24425/ams.2020.134132 KW - powered roof support KW - stability KW - longwall KW - roof fall A1 - Rajwa, Sylwester PB - Committee of Mining PAS VL - vol. 65 DA - 2020.08.31 T1 - The Influence of the Geometrical Construction of the Powered Roof Support on the Loss of a Longwall Working Stability Based on the Practical Experience SP - 511 UR - http://www.journals.pan.pl/dlibra/publication/edition/117219 T2 - Archives of Mining Sciences ER -