TY - JOUR N2 - This paper presents application of optical microscope for evaluation of microtexture changes of coarse aggregate during simulated polishing in laboratory. Observations of the apparent changes on surfaces of seven different aggregates are presented. Simulation polishing of aggregate was performed in accordance with PN-EN 1097-8:2009. lmages of the aggregate surface were taken with the optical microscope in the reflection mode in particular stages of polishing. Digital images were analyzed. Standard deviation was determined on the basis of the histogram of intensities from digital images of the surfaces of aggregate grains which was assurned as the measure of changes in microtexture during simulated polishing (namely the σh parameter). Statistical analysis has shown that the changes of the σh parameter between the particular stages of polishing confirm certain trends related to the petrographic characteristic of the rocks. Aggregates which included minerals of similar hardness (granodiorite, dolomile, basalt) were more prone to polishing than gabbro and postglacial. Regeneration of the microtexture, the recovery to its original asperity, occurred in the case of quartz sandstone and steelmaking slag. L1 - http://www.journals.pan.pl/Content/84087/mainfile.pdf L2 - http://www.journals.pan.pl/Content/84087 PY - 2016 IS - No 2 EP - 34 KW - coarse aggregate KW - microtexture KW - image analysis KW - histogram of intensities KW - PSV A1 - Gardziejczyk, W. A1 - Wasilewska, M. PB - WARSAW UNIVERSITY OF TECHNOLOGY FACULTY OF CIVIL ENGINEERING and COMMITTEE FOR CIVIL ENGINEERING POLISH ACADEMY OF SCIENCES DA - 30.06.2016 T1 - Evaluation of microtexture changes of coarse aggregate during simulated polishing SP - 19 UR - http://www.journals.pan.pl/dlibra/publication/edition/84087 T2 - Archives of Civil Engineering ER -