Applied sciences

Gospodarka Surowcami Mineralnymi - Mineral Resources Management

Content

Gospodarka Surowcami Mineralnymi - Mineral Resources Management | 2018 | vol. 34 | No 4

Download PDF Download RIS Download Bibtex

Abstract

The functioning of European economies and societies requires a stable and sustainable supply of mineral resources. For 10 years now EU has been developing raw materials initiative to secure European minerals supply. In many cases, areas with known or hypothetic mineral resources, are not sufficiently valued by society and authorities, remain unprotected and face competing land uses with the risk of becoming sterilized. MINATURA 2020 project was born out of a need to develop a harmonised framework which allow a common way of identifying “mineral deposits of public importance” (MDoPI) and their safeguarding via land use planning. The project has left a useful set of guidelines and proposals how to advance on the creation of a European network of MDoPIs to avoid sterilization of “deposits worth safeguarding”.

In Poland, the need for legal protection of mineral deposits has been discussed intensively in recent years. Various proposals aimed at better system of mineral deposits safeguarding, especially those which should be recognized as of public importance, have been proposed. However, until now only a few coal deposits were recognized as strategic. Currently, the Polish National Mineral Policy is under preparation. Its overriding objective is to provide access to the necessary minerals, also in the longterm perspective. It assumes among others activities aimed at protection of mineral deposits regarding land use planning system.

Paper presents scope and general results of MINATURA2020 project, with details on MINATURA2020 methodology implementation in Poland, Project of the Polish National Mineral Policy with its objectives and key pillars, position of MDoPIs in this Project, and – finally – expected future steps related to MDoPI safeguarding in EU and in Poland.

Go to article

Authors and Affiliations

Krzysztof Galos
ORCID: ORCID
Günter Tiess
Alicja Kot-Niewiadomska
ORCID: ORCID
Diego Murguia
Blazena Wertichová
Download PDF Download RIS Download Bibtex

Abstract

Steel and cast-iron products, due to their low price and beneficial properties, are the most widely used among metals; their consumption has become an indicator of the economic development of countries. The characteristics of iron raw materials, in relation to current metallurgical requirements, are presented in the present this article. The globalization of the trade and development of steelmaking technologies have caused significant changes in the quality of raw materials in the last half-century forcing improvements in processing technologies. In many countries, standard concentrates (at least 60% Fe) are almost twice as rich as those processed in the mid-20th century. Methods of quality assessment have been improved and quality standards tightened.

The quality requirements for the most important raw materials ‒ iron ores and concentrates, steel scrap, major alloy metals, coking coal, and coke, as well as gas and other energy media ‒ are reviewed in the present paper. Particular attention is paid to the quality testing methodology. The quality of many raw materials is evaluated multi-parametrically: both chemical and physical characteristics are important. Lower-quality parameters in raw materials equate to significantly lower prices obtained by suppliers in the market.

The markets for these raw materials are diversified and governed by separate sets of newly introduced rules. Price benchmarks (e.g. for standard Australian metallurgical coal) or indices (for iron concentrates) apply. Some raw materials are quoted within the framework of the commodity market system (certain alloying components and steel scrap). The abandonment of the long-established system of multi-annual contracts has led to wide fluctuations in prices, which have reached a scale similar to that of other metals.

Go to article

Authors and Affiliations

Mariusz Krzak
Andrzej Paulo
Download PDF Download RIS Download Bibtex

Abstract

Ore and non-ore mineralization in cracks filled with hydrocarbons in the dark grey Upper-Devonian limestone has been found in the Józefka quarry of Upper Devonian limestone and dolomite near the Górno village near Kielce at Holy Cross Mts. Poland. Hydrocarbons in the liquid form and iron and copper sulphides appears hear in the fault zone as joints filling. The wall rocks are impregnated by hydrocarbons giving them black color. Hydrocarbon impregnations appears also following the bedding planes The coexistence of ore mineralization and hydrocarbon suggests their common origin and migration from deep-seated sources, that may be the Silurian Ordovician or Lower to Middle Devonian black shales. The metallic-hydrocarbon compounds were suggested as metals carrier.

Ore and non-ore mineralization in cracks filled with hydrocarbons in the dark grey Upper-Devonian limestone has been found in the Józefka quarry of Upper Devonian limestone and dolomite near the Górno village near Kielce at Holy Cross Mts. Poland. Hydrocarbons in the liquid form and iron and copper sulphides appears hear in the fault zone as joints filling. The wall rocks are spotty impregnated by hydrocarbons giving them black color. Hydrocarbon impregnations appears also following the bedding planes The coexistence of ore mineralization and hydrocarbon suggests their common origin and migration from deep-seated sources, that may be the Silurian Ordovician or Lower to Middle Devonian black shales. The metallic-hydrocarbon compounds were suggested as metals carrier.

Go to article

Authors and Affiliations

Maciej Pawlikowski
Marek Nieć
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

Washing is very popular technological operation removing clay particles from aggregates. The amount of mineral washing sludges increases. Besides filling the excavations, there is no common method of their utilization. The usage of sludges from washing aggregates in building ceramics might be environmentally friendly way to utilize them.

This paper presents laboratory research on two type of sludges: from dolomite and limestone aggregates washing. Selected properties of sludges such as water content, particle size distribution (sieve and areometric method), chemical composition (XRF), mineral composition (XRD), thermal properties (STA/EGA, dilatometry, heating microscopy) and stability of fired materials during steam exposure were determined.

It was found that dolomite sludge contains more clay minerals and less carbonates, it is more finely grained than limestone sludge. Limestone sludge has large fluctuations in water content and has high content of potentially hazardous calcite grains. During heating up to 1300°C of both dried sludges decarbonation and sintering take place. Dolomite sludge softens, melts and flows below 1300°C. After firing sludges at 1000°C material made of limestone sludge is not resistant to steam.

The obtained result suggests that dolomite sludge can be used in building ceramics technology without processing as main component of ceramic mass. Limestone sludge have to be ground before its application in building ceramic materials. Results suggest that it can not be used as the main raw material in ceramic masses, but only as an additive.

Go to article

Authors and Affiliations

Ewelina Kłosek-Wawrzyn
Anna Bugaj
Download PDF Download RIS Download Bibtex

Abstract

Control of the technological processes of coal enrichment takes place in the presence of wide disturbances. Thus, one of the basic tasks of the coal enrichment process control systems is the stabilization of coal quality parameters at a preset level. An important problem is the choice of the controller which is robust for a variety of disturbances. The tuning of the controller parameters is no less important in the control process . Many methods of tuning the controller use the dynamic characteristics of the controlled process (dynamic model of the controlled object). Based on many studies it was found that the dynamics of many processes of coal enrichment can be represented by a dynamic model with properties of the inertial element with a time delay. The identification of object parameters (including the time constant) in industrial conditions is usually performed during normal operation (with the influence of disturbances) from this reason, determined parameters of the dynamic model may differ from the parameters of the actual process. The control system with controller parameters tuned on the basis of such a model may not satisfy the assumed control quality requirements.

In the paper, the analysis of the influence of changes in object model parameters in the course of the controlled value has been carried out. Research on the controller settings calculated according to parameters T and τ were carried out on objects with other parameter values. In the studies, a sensitivity analysis method was used. The sensitivity analysis for the three methods of tuning the PI controller for the coal enrichment processes control systems characterized by dynamic properties of the inertial element with time delay has been presented. Considerations are performed at various parameters of the object on the basis of the response of the control system for a constant value of set point. The assessment of considered tuning methods based on selected indices of control quality have been implemented.

Go to article

Authors and Affiliations

Roman Kaula
Download PDF Download RIS Download Bibtex

Abstract

The purpose of the research was mapping, inventorization, and valorization of coal mining waste dumps from the mines of JSW SA company, for the needs of recovery of coal from the dump material as well as the reclamation and management of examined facilities. The valorization of post-mining waste dumps has been carried out using a methodology which considers the problems of reclamation, management, accessibility of the dumps as well as environmental hazards connected with disposing of mining and preparation wastes on the ground surface. An inventorization of 10 coal mining waste dumps coming from 6 mines of JSW SA including in their range 7 deposits: Borynia, Jastrzębie, Zofiówka, Budryk, Knurów, Szczygłowice and Pniówek was carried out. The source material within the localization of particular dumps was obtained from archival materials coming from coal mines and municipalities where the dumps are located. Verified data has been drawn on topographical map, which results in the map of coal mining waste dumps. The results of the valorization of the dumps comprise the defining of: the name of the dump, state of the dump, surface of the dump, accessibility, name of the coal mine from where the wastes come from, type of technical and biological reclamation and possibilities of coal recovery, which have been brought on the drawn map. Basing on collected and elaborated data, an attempt of defining of potential possibilities of recovery of coal from the dumps and connection of coal quality in the deposits of JSW SA and in waste material was made. The results of the research showed that in spite of preliminary information that a majority of the investigated dumps may be considered as potential facilities for coal recovery, ultimately the recovery is economically justified only in several cases (5 facilities).

Go to article

Authors and Affiliations

Marek Marcisz
ORCID: ORCID
Łukasz Gawor
ORCID: ORCID
Krystian Probierz
Download PDF Download RIS Download Bibtex

Abstract

The use of biomass in the energy industry is the consequence of ongoing efforts to replace Energy from fossil fuels with energy from renewable sources. However, due to the diversity of the biomass, its use as a solid fuel generates waste with diverse and unstable chemical composition. Waste from biomass combustion is a raw material with a very diverse composition, even in the case of using only one type of biomass. The content of individual elements in fly ash from the combustion of biomass ranges from zero to tens of percent. This makes it difficult to determine the optimal recovery methods. The ashes from the combustion of biomass are most commonly used in the production of building materials and agriculture. This article presents the elemental composition of the most commonly used biomass fuels. The results of the analysis of elemental composition of fly ashes from the combustion of forest and agricultural biomass in fluidized bed boilers used in the commercial power industry were presented. These ashes are characterized by a high content of calcium (12.3–19.4%), silicon (1.2–8.3%), potassium (0.05–1.46%), chlorine (1.1–6.1%), and iron (0.8–6.5%). The discussed ashes contained no sodium. Aluminum was found only in one of the five ashes. Manganese, chromium, copper, nickel, lead, zinc, sulfur, bismuth, titanium and zirconium were found in all of the examined ashes. The analysis of elemental composition may allow for a preliminary assessment of the recovery potential of a given ash.

Go to article

Authors and Affiliations

Alicja Uliasz-Bocheńczyk
ORCID: ORCID
Eugeniusz Mokrzycki
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

During drilling through aquifers using the rotary drilling method with drilling fluid application, the phenomenon of formation clogging in near-well zone takes place. This leads to physical changes in pore spaces in consequence of the deposition solid phase particles originating from the drilling fluid. Due to this fact, filtration velocity in the clogged zones of the aquifer formation decreases, which results in increased pressure drawdown and decreased well hydraulic efficiency. Therefore, it causes a reduction of the well total capacity. The article consists of studies connected to the development of the mud which will constitute the basis for a complex mud system intended for hydrogeological drilling in different encountered geological conditions. In the framework of laboratory research, technological parameters of six, commonly applied in oil and gas industry, polymer agents as well as new agent developed at the Drilling, Oil and Gas Faculty AGH-UST in Krakow were examined. The undertaken studies showed that the new agent, marked as CAGEx, provides the required technological parameters and can be applied as a base for drilling muds intended for hydrogeological drilling. The undertaken industrial research of the new CAGEx drilling mud carried out while drilling water intake well, confirmed the great stability of its technological parameters as well as insignificant influence on rock permeability damage in filter zone. The water intake well is characterized by high hydraulic efficiency and does not require additional activation treatment.

Go to article

Authors and Affiliations

Jan Macuda
Jakub Siemek
Sławomir Wysocki
Magdalena Gaczoł
Download PDF Download RIS Download Bibtex

Abstract

Overseas mining investment generally faces considerable risk due to a variety of complex risk factors. Therefore, indexes are often based on conditions of uncertainty and cannot be fully quantified. Guided by set pair analysis (SPA) theory, this study constructs a risk evaluation index system based on an analysis of the risk factors of overseas mining investment and determines the weights of factors using entropy weighting methods. In addition, this study constructs an identity-discrepancycontrary risk assessment model based on the 5-element connection number. Both the certainty and uncertainty of the various risks are treated uniformly in this model and it is possible to mathematically describe and quantitatively express complex system decisions to evaluate projects. Overseas mining investment risk and its changing trends are synthetically evaluated by calculating the adjacent connection number and analyzing the set pair potential. Using an actual overseas mining investment project as an example, the risk of overseas mining investment can be separated into five categories according to the risk field, and then the evaluation model is quantified and specific risk assessment results are obtained. Compared to the field investigation, the practicability and effectiveness of the evaluation method are illustrated. This new model combines static and dynamic factors and qualitative and quantitative information, which improves the reliability and accuracy of risk evaluation. Furthermore, this evaluation method can also be applied to other similar evaluations and has a certain scalability.

Go to article

Authors and Affiliations

Zhaoyang Ma
Guoqing Li
Nailian Hu
Di Liu
Download PDF Download RIS Download Bibtex

Abstract

The article addresses the issue of conditions that the borrower is obliged to fulfill during the crediting process. These terms, the so-called covenants are built into credit agreements and are aimed at limiting banks’ risk when financing business entities. However, at the same time, covenants constitute conditions limiting the scope of use of bank loans. Covenants are very diverse. The principle hypothesis of the study assumes that the covenants differ according to the type of credit and the characteristic of the industry and the financial situation of the enterprise. In order to examine the hypothesis, an analysis of 25 credit agreements in three corporations and their subsidiaries was undertaken. These entities belong to fuel, mining and metallurgical sectors. At the same time, we observe the extent to which these covenants were kept during four quarters of 2016 and two quarters of 2017. Due to the confidentiality of the data contained in the loan agreements, the names of groups and their companies were kept confidential at the request of their management. Studies have also shown that abiding by non-financial covenants has been more difficult than abiding by financial covenants. In covenants, several contracts stipulated that a company cannot freely dispose fixed assets, restructure them or use leased assets which hinders the use of those asset to repay debt. One major obstacle was the fact that the company could not undertake any additional business beyond the existing one. This hindered the diversification of companies’ activities, which would improve their competitive position on the market. The author intends to conduct further research on covenants to highlight their flexible use and to increase the availability of bank loans to business entities.

Go to article

Authors and Affiliations

Agata Sierpińska-Sawicz
ORCID: ORCID

Additional info

The subject matter of the articles published in Mineral Resources Management covers issues related to minerals and raw materials, as well as mineral deposits, with particular emphasis on:

  • The scientific basis for mineral resources management,
  • The strategy and methodology of prospecting and exploration of mineral deposits,
  • Methods of rational management and use of deposits,
  • The rational exploitation of deposits and the reduction in the loss of raw materials,
  • Mineral resources management in processing technologies,
  • Environmental protection in the mining industry,
  • Optimization of mineral deposits and mineral resources management,
  • The rational use of mineral resources,
  • The economics of mineral resources,
  • The raw materials market,
  • Raw materials policy,
  • The use of accompanying minerals,
  • The use of secondary raw materials and waste,
  • Raw material recycling,
  • The management of waste from the mining industry.

This page uses 'cookies'. Learn more