Details

Title

Tensile Split Hopkinson Bar Technique: Numerical Analysis of the Problem of Wave Disturbance and Specimen Geometry Selection

Journal title

Metrology and Measurement Systems

Yearbook

2016

Volume

vol. 23

Issue

No 3

Authors

Keywords

Split Hopkinson Pressure Bar ; tension testing ; numerical analysis ; strain-rate effects

Divisions of PAS

Nauki Techniczne

Coverage

425-436

Publisher

Polish Academy of Sciences Committee on Metrology and Scientific Instrumentation

Date

2016.09.30

Type

Artykuły / Articles

Identifier

DOI: 10.1515/mms-2016-0027 ; ISSN 2080-9050, e-ISSN 2300-1941

Source

Metrology and Measurement Systems; 2016; vol. 23; No 3; 425-436

References

Lindholm (1964), Some experiments with the split Hopkinson pressure bar, J Mech Phys Solids, 12, 317, doi.org/10.1016/0022-5096(64)90028-6 ; Steinberg (1996), Equation of State and Strength Properties of Selected Materials LLNL Report no, UCRL, 106439. ; Ogawa (1984), Impact - tension compression test by using a split - Hopkinson bar, Exp Mech, 24, 81, doi.org/10.1007/BF02324987 ; Owens (2008), A Tensile Split Hopkinson Bar for Testing Particulate Polymer Composites Under Elevated Rates of Loading, Exp Mech, 49, 799, doi.org/10.1007/s11340-008-9192-7 ; Gerlach (2012), A new split Hopkinson tensile bar design of Impact Engineering, Int J, 50. ; Moćko (2013), Analysis of the impact of the frequency range of the tensometer bridge and projectile geometry on the results of measurements by the split Hopkinson pressure bar method, Metrol Meas Syst, 20, 555, doi.org/10.2478/mms-2013-0047 ; Nicholas (1981), Tensile testing of materials at high rates of strain, Exp Mech, 21, 177, doi.org/10.1007/BF02326644 ; Panowicz (2013), Analysis of selected contact algorithms types in terms of their parameters selection of KONES Powertrain and Transport, Journal, 20. ; Mohr (2007), Shaped specimen for the high - strain rate tensile testing using a split Hopkinson pressure bar apparatus, Exp Mech, 47, 681, doi.org/10.1007/s11340-007-9035-y ; Johnson (1985), Fracture characteristics of three metals subjected to various strains , strain rates , temperatures and pressures Fracture, Engineering Mechanics, 21. ; Moćko (2014), The influence of stress - controlled tensile fatigue loading on the stress - strain characteristics of AISI steel, Materials Design, 1045. ; Field (2004), Review of experimental techniques for high rate deformation and shock studies of Impact Engineering, Int J, 30, 725, doi.org/10.1016/j.ijimpeng.2004.03.005 ; Staab (1991), A direct - tension split Hopkinson bar for high strain - rate testing, Exp Mech, 31, 232, doi.org/10.1007/BF02326065 ; Kruszka (2014), Experimental analysis of visco - plastic properties of the aluminium and tungsten alloys by means of Hopkinson bars technique Mechanics and Materials, Applied, 566, doi.org/10.4028/www.scientific.net/amm.566.110 ; Kolsky (1949), An investigation of the mechanical properties of materials at very high rates of loading, Proc Phys Soc Lond, 62. ; Cadoni (2009), Mechanical characterization of concrete in tension and compression at high strain rate using a modified Hopkinson bar, Mag Concrete Res, 61, 221, doi.org/10.1680/macr.2006.00035 ; Lindholm (1968), High Strain - rate Testing : Tension and Compression, Exp Mech, 8, 1, doi.org/10.1007/BF02326244 ; Baranowski (2014), Study on computational methods applied to modelling of pulse shaper in split - Hopkinson bar, Arch Mech, 66, 429.
×