In literature, it is known that a Light Emitting Diode (LED) could be used as a light sensor. It is also known that its emitted light spectrum and sensitivity spectrum can be partially overlapped. This work presents how commercial LEDs can be used as light emitters and simultaneously as sensors of the reflected portion of the light emitted by themselves. The realized devices present a unique characteristic: the transmitter and the receiver coincide spatially as they are the same device. This ensures the perfect overlapping between transmission and reception radiation lobes that could provide many benefits in several applications like as distance measurements or image sensors. Some simple electronic configurations that use LEDs as detectors of their own emitted light are presented. It has been also demonstrated how these LEDs_Tx-Rx can work as image sensors by acquiring an image of a simple test object, and how they can realize distance sensors with respect to other known techniques. Further advantages can be obtained by realizing LED_Tx-Rx array in single integrated devices. With the realization of such devices, it will be also possible to experiment new constructive solutions for commonly used applications, without the need of using separate emitter and receiver.

In this study, the temperature influence on the spectral responsivity of a Light Emitting Diode (LED) used as a photoreceptor, combined to light source spectrum is correlated to electrical characteristics in order to propose an alternative method to estimate LED junction temperature, regardless of the absolute illumination intensity and based on the direct correlation between the integral of the product of two optical spectra and the photo-generated currents. A laboratory test bench for experimental optical measurements has been set in order to enable any characterizing of photoelectric devices in terms of spectral behaviour, in a wavelength range placed between 400–1000 nm, and of current-voltage characteristics as function of temperature by using two different illumination sources. The temperature is analysed in a range from 5°C up to 85°C, so as to evaluate thermal variation effects on the sensor performance. The photo-generated current of two LEDs with different peak wavelengths has been studied. Research has observed and mathematically analysed what follows: since the photo-generated current strictly depends on the combination between the spectral response of the photoreceptor and the lighting source response, it becomes possible to estimate indirectly the junction temperature of the LEDs by considering the ratio between the photogenerated currents obtained by using two different illumination sources. Such results may for one thing increase knowledge in the fields where LEDs are used as photo-detectors for many applications and for another, they could be extended to generic photodetectors, thus providing useful information in photovoltaic field, for instance.