In this paper, finite element modelling is employed for simulating and analysing seepage and slope stability of earthfill dam via GeoStudio software. Two products are employed, which are SLOPE/W for slope stability and SEEP/W for seepage analysis. The behaviour of earthfill dam with four different types of sandy soils having different values of hydraulic conductivity (K) has been studied. Different upstream (US) slopes of 1:2, 1:2.5, 1:3 and 1:3.5 for the earthfill dam are simulated. The downstream (DS) slope is constant at 1:2. The results showed for all the four types of soils that when the US slope is increased, the amount of seepage from the dam increases and the factor of safety (F) decreases. For each US slope, when K (type of soil) increases, both seepage and F increase. Fine sand soil is associated with less seepage and less F. Sixteen equations are obtained to predict both seepage and F with respect to US slope for each type of soil and K of the soil for US slope. An experimental model for earthfill dam is constructed in the laboratory of hydraulics, Benha University to investigate the seepage of water through earthfill dams. It is concluded that seepage decreased when K decreased, and when the US slope for each type of soil decreased. The seepage increased when K increased for each US slope. Seven equations are obtained to predict seepage with respect to US slope for each type of soil, and K for each US slope.

This paper investigated the problems and impacts of transient flow in pipeline systems due to pump power failure. The impact of different protection devices was presented to assure surge protection for the pipeline system. A model via Bent-ley HAMMER V8.0 Edition was employed to analyse and simulate hydraulic transients in the pipeline system, and protec-tion alternatives were studied.

Surge protection included using only an air vessel, using an air vessel and two surge tanks, and employing five air ves-sels and vacuum breaker. The obtained results for pressures, heads, and cavitation along the pipeline system were graph-ically presented for various operating conditions. Using five air vessels with vacuum breaker valve as surge protection proved to be more effective and economical against pump power failure.

Changing the flow density did not have a significant impact on the pressures.

For protection with an air vessel; it was concluded that the value 40% of the original diameter for inlet pipe diameter of air vessel, and the value of 2/3 of original pipe diameter were critical values for the transient pressures. Cast iron pipes proved to be the best pipe material for all studied volumes of the air vessel.

For protection with an air vessel and two surge tanks; as the inlet pipe diameters increased the maximum pressures in-creased and the minimum pressures decreased.

Regression analyses were performed obtaining equations to predict the pressures according to the inlet pipe diameter, the area of surge tank, and the pipe diameter.