This research paper presents the results of the analyses of the course of technical wear over time carried out for residential masonry buildings located in the mining area of the Lublin Coal Basin (LCB). As a result of the conducted analyses, models of the course of technical wear over time were obtained for the entire building development and for groups of buildings, taking into account the conducted renovation works and preventive structural protection. By comparing the parameters of the developed models, statistically significant differences in the course of technical wear resulting from the quality of maintenance and the use of preventive measures were identified. In addition, the durability of individual groups of structures was estimated and compared. Based on a comparison of the course of technical wear of 22-year-old building structures, unrenovated and with similar structural and material solutions, it was found that the rate of increase in technical wear after 50 years of use is on average 3.5% lower than in the case of unprotected buildings. In addition, the use of preventive structural protection extends the durability of the analysed building structures by an average of over 13 years. The obtained results may e.g. help owners or managers optimise the Maintenance Management of building structures.

The paper presents the results of research concerning the assessment of dynamic resistance of existing industrial hall structures located in areas with different seismic activity. The basis for analyses was a three-nave industrial hall with a steel structure. Numerical calculations were performed using the finite element method (FEM), using the response spectrum method in dynamic analysis. The calculations were carried out in variants, using standard accelerated response spectra according to Eurocode 8 and those determined for the Upper Silesian Coal Basin (USCB) and Legnica-Glogow Copper District (LGCD) area. Using the author's procedure for the assessment of the dynamic resistance, for each of the extortion analysed, the structure's response to the dynamic excitation was compared with the effects of load combinations adopted at the design stage, thus establishing the limit values of the design horizontal ground acceleration a max/g,h understood as the structure's resistance to tremors. This allowed to assess the impact of seismic activity from a specific area on the dynamic resistance of the subjected object. The article also discusses the way of interpretation and the scope of application of the obtained results and proposed procedure.