Wear resistance of TiC-cast steel metal matrix composite has been investigated. Composites were obtained with SHSB method known as
SHS synthesis during casting. It has been shown the differences in wear between composite and base cast steel. The Miller slurry
machine test were used to determine wear loss of the specimens. The slurry was composed of SiC and water. The worn surface of
specimens after test, were studied by SEM. Experimental observation has shown that surface of composite zone is not homogenous and
consist the matrix lakes. Microscopic observations revealed the long grooves with SiC particles indented in the base alloy area, and
spalling pits in the composite area. Due to the presence of TiC carbides on composite layer, specimens with TiC reinforced cast steel
exhibited higher abrasion resistance. The wear of TiC reinforced cast steel mechanism was initially by wearing of soft matrix and in
second stage by polishing and spalling of TiC. Summary weight loss after 16hr test was 0,14÷0,23 g for composite specimens and 0,90 g
for base steel