[1] Lewandowski, J.L., (1997). Moulding materials. Kraków: Akapit Publisher. (in Polish).
[2] Czerwinski, F., Mir, M. & Kasprzak, W. (2015). Application of cores and binders in metalcasting. International Journal of Cast Metals Research. 28(3), 129-139. DOI: 10.1179/1743133614Y.0000000140.
[3] Ferreira, S. H. G. da, J. C. E., Kumar, V. & Garza-Reyes, J. A. (2020). Benchmarking of cleaner production in sand mould casting companies. Management of Environmental Quality: An International Journal. 31(5), 1407-1435. DOI: 10.1108/MEQ-12-2019-0272.
[4] Fayomi, O.S.I. (2016). Hybrid effect of selected local binders on the moulding properties of river niger silica sand for industrial application. Journal of Nanoscience with Advanced Technology. 1(4), 19-23. DOI: 10.24218/jnat.2016.19.
[5] Yaro, S.A. & Suleiman, M.U. (2006), Cassava/guinea corn starches and soybean oil as core binders in sand casting of aluminium silicon (Al-Si)lloy. Journal of Engineering and Technology. 1(1), 47-55.
[6] Grabowska, B. & others. (2018). Influence of carbon fibers addition on selected properties of microwave-cured moulding sand bonded with BioCo2 binder. Archives of Foundry Engineering. 18(3), 152-160. DOI: 10.24425/123618.
[7] Chowdhury, S.I. Rashid, H. & Mumtaz, G.R. (2016) Comparison and CFD verification of binder effects in sand mould casting of aluminum alloy. ANNALS of Faculty Engineering Hunedoara - International Journal of Engineering. 14(1), 143-146.
[8] Manley, D. (2000). 9 - Meals, grits, flours and starches (other than wheat). Technology of Biscuits, Crackers and Cookies (Third Edition). (104–111). Red. Woodhead Publishing.
[9] Yu, W., Quek, W., Li, C., Gilbert, R. & Fox, G. (2018) Effects of the starch molecular structures in barley malts and rice adjuncts on brewing performance. Fermentation. 4(4), 103-124. DOI: 10.3390/fermentation4040103.
[10] Fox, G.P. (2009). Chemical composition in barley grains and malt quality. Genetics and Improvement of Barley Malt Quality. (63-98). Zhang G. & C. Li, Red. Berlin, Heidelberg: Springer Berlin Heidelberg. [11] Pezarski, F., Izdebska-Szanda I., Smoluchowska, E., Świder, R. & Pysz, A. (2011). Application of moulding sands with geopolymer binder in the manufacture of castings from aluminium alloys. Prace Instytutu Odlewnictwa. 51(2), 23-34. (in Polish).
[12] Stachowicz, M. Granat, K. & Nowak, D. (2012). Bending strength measurement as a method of binder quality assessment on the example of water-glass containing moulding sands. Archives of Foundry Engineering. 12(1), 175-178. (in Polish).
[13] Stachowicz, M., Granat, K. & Nowak, D. (2010). Studies on the possibility of more effective use of water glass thanks to application of selected methods of hardening. Archives of Foundry Engineering. 10 (spec.2), 135-140.
[14] Szymański, A., (2007). Soil mechanics. Warszawa: Wydawnictwo SGGW. (in Polish).
[15] Ochulorl, E.F., Ugboaja, J.O. & Olowomeye, O.A. (2019). Performance of kaolin and cassava starch as replacements for bentonite in moulding sand used in thin wall ductile iron castings. Nigerian Journal of Technology. 38(4), 947-956. DOI: 10.4314/njt.v38i4.18.
[16] Popoola, A.P.I., Abdulwahab, M. & Fayomi, O.S.I. (2012). Synergetic performance of palm oil (Elaeis guineensis) and pine oil (Pinus sylvestris) as binders on foundry core strength. International Journal of the Physical Sciences. 7(24), 3062-3066. DOI: 10.5897/IJPS12.347.
[17] Atanda, P.O., Akinlosotu, O.C. & Oluwole, O.O. (2014). Effect of some polysaccharide starch extracts on binding characteristics of foundry moulding sand. International Journal of Scientific & Engineering Research. 5(3), 362-367.
[18] Pezarski, F., Maniowski, Z., Izdebska-Szanda, I. & Smoluchowska, E. (2006). Investigations of moulding and core sands made with a new geopolymer binder assigned for production of steel castings. Archives of Foundry. 6(20), 65-70. (in Polish).
[19] Pezarski, F., Smoluchowska, E. & Izdebska-Szanda, I. (2008). Application of geopolymer binder in manufacturing of casting from ferrous alloys. Prace Instytutu Odlewnictwa. 48(2), 19-34. (in Polish).
[20] Jaworski, J. (2006). Research of stability of preparation system of circulating moulding sands. Archives of Foundry Engineering. 6(18), 495-500. (in Polish).
[21] Michta-Stawiarska, T. (2000). The selected iron castings defects as the effect of the sandmix quality. Solidification of Metais and Alloys. 2(43), 345-347. (in Polish).
[22] Lewandowski, J.L. (1971). Moulding materials. Warszawa Kraków: Wydawnictwo Naukowe PWN. (in Polish).
[23] Bobrowski, A. (2018). The phenomenon of dehydroxylation of selected mineral materials from the aluminosilicates group as the determinant factor of the knock-out improvement of moulding and core sands with inorganic binder. Wydawnictwo Archives of Foundry Engineering, Komisja Odlewnictwa PAN Katowice. (in Polish).
[24] Paduchowicz, P., Stachowicz, M. & Granat, K. (2017). Effect of Microwave Heating on Moulding Sand Properties with Gypsum Binder. Archives of Foundry Engineering. 17(3), 97-102.
[25] Sakwa, W., Wachelko, T. (1981). Foundry materials for molds and foundry cores. Katowice: Śląsk Publisher. (in Polish).
[26] Zhoua, X. , Yang J. & Quc. G. (2007). Study on synthesis and properties of modified starch binder for foundry. Journal of Materials Processing Technology. 183. 407-411.
[27] Aramide, F. O., Aribo, S. & Folorunso, D.O. (2011). Optimizing the moulding properties of recycled ilaro silica sand. Leonardo Journal of Sciences. 19, 93-102.
[28] Jordan, G., Eulenkamp, C., Calzada, E., Schillinger, B., Hoelzel, M., Gigler, A., Stanjek, H. & Schmahl, W.W. (2013). Quantitative in situ study of the dehydration of bentonite-bonded molding sands. Clays and Clay Minerals. 61(2), 133-140.
[29] Blaszkowski, K. (1975), Mold and core technology. Bielsko-Biała: WSiP. Wydanie III. (in Polish).

[1] Mostafaei, A., Elliott, A.M., Barnes, J.E., Li, F., Tan, W., Cramer, C.L., Nandwana, P. & Chmielus, M. (2020). Binder jet 3D printing – process parameters, materials, properties, and challenges. Progress in Materials Science. 119, 100707. DOI: https://doi.org/10.1016/j.pmatsci.2020.100707.
[2] Le Néel, T.A., Mognol, P. & Hascoët, J.-Y. (2018). A review on additive manufacturing of sand molds by binder jetting and selective laser sintering. Rapid Prototyping Journal. 24(8), 1325-1336. https://doi.org/10.1108/RPJ-10-2016-0161.
[3] Gibson, I., Rosen, D. W., Stucker, B., Khorasani, M. (2021). Additive manufacturing technologies. Cham, Switzerland: Springer. DOI:10.1007/978-3-030-56127-7.
[4] Upadhyay, M., Sivarupan, T., & El Mansori, M. (2017). 3D printing for rapid sand casting—A review. Journal of Manufacturing Processes. 29, 211-220. https://doi.org/10.1016/j.jmapro.2017.07.017.
[5] Lewandowski, J.L. (1997). Materials for casting molds. Krakow: Akapit. (in Polish).
[6] Jakubski, J. & Dobosz, S. M. (2007). The thermal deformation of core and moulding sands according to the hot distortion parameter investigations. Archives of Metallurgy and Materials. 52(3), 421.
[7] Ignaszak, Z., Popielarski, P. & Strek, T. (2011). Estimation of coupled thermo-physical and thermo-mechanical properties of porous thermolabile ceramic material using Hot Distortion Plus® test. Defect and Diffusion Forum. 312-315, 764-769. DOI:10.4028/www.scientific.net/DDF.312-315.764. [
8] Dańko, R. (2017). Influence of the matrix grain size on the apparent density and bending strength of sand cores. Archives of Foundry Engineering. 17(1), 27-30. DOI:10.1515/afe-2017-0005.
[9] Sundaram, D., Svidró, J.T., Svidró, J. & Diószegi, A. (2022). A novel approach to quantifying the effect of the density of sand cores on their gas permeability. Journal of Casting & Materials Engineering. 6(2), 33-38. DOI:10.7494/jcme.2022.6.2.33.
[10] Wisniewski, P., Sitek, R., Towarek, A., Choinska, E., Moszczynska, D., & Mizera, J. (2020). Molding binder influence on the porosity and gas permeability of ceramic casting molds. Materials. 13(12), 2735, 1-13. DOI:10.3390/ma13122735.
[11] Dobosz, S.M., Grabarczyk, A., Major-Gabryś, K. & Jakubski, J. (2015). Influence of quartz sand quality on bending strength and thermal deformation of moulding sands with synthetic binders. Archives of Foundry Engineering. 15(2), 9-15. DOI:10.1515/afe-2015-0028.
[12] Multiserw-Morek (2014) Device for testing the strength of molding sands. Retrieved October 15, 2023, from http://multiserw-morek.pl/products,urzadzenia_do_badania_mas_formierskich_i_rdzeniowych,urzadzenie_do_badania_wytrzymalosci_mas_formierskich-1. (in Polish).
13] Bobrowski, A., Kaczmarska, K., Drożyński, D., Woźniak, F., Dereń, M., Grabowska, B., Żymankowska-Kumon, S. & Szucki, M. (2023). 3D Printed (Binder Jetting) Furan Molding and Core Sands—Thermal Deformation, Mechanical and Technological Properties. Materials. 16(9), 3339, 1-17. DOI:10.3390/ma16093339.
[14] Multiserw-Morek (2014) Device for measuring the permeability of molding sands. Retrieved October 15, 2023, from http://multiserw-morek.pl/products,urzadzenia_do_badania_mas_formierskich_i_rdzeniowych,urzadzenie_do_pomiaru_przepuszczalnosci_mas_formierskich. (in Polish).
[15] Multiserw-Morek (2014) A universal device for testing hot-distortion phenomena and bending strength. Retrieved October 15, 2023, from http://multiserw-morek.pl/products,urzadzenia_do_badania_mas_formierskich_i_rdzeniowych,uniwersalny_aparat_do_badania_zjawisk_hot-distortion_oraz_wytrzymalosci_na_zginanie. (in Polish).
[16] Kamińska, J., Puzio, S., Angrecki, M. & Łoś, A. (2020). Effect of reclaim addition on the mechanical and technological properties of moulding sands based on pro-ecological furfuryl resin. Archives of Metallurgy and Materials. 65(4), 1425-1429. DOI: 10.24425/amm.2020.133709.
[17] Major-Gabryś, K. (2019). Environmentally friendly foundry molding and core sands. Journal of Materials Engineering and Performance. 28, 3905-3911. DOI:10.1007/s11665-019-03947-x.
[18] Mitra, S., Rodríguez de Castro, A. & El Mansori, M. (2018). The effect of ageing process on three-point bending strength and permeability of 3D printed sand molds. The International Journal of Advanced Manufacturing Technology. 97, 1241-1251. DOI:10.1007/s00170-018-2024-8.
[19] Sundaram, D., Svidró, J.T., Svidró, J. & Diószegi, A. (2021). On the relation between the gas-permeability and the pore characteristics of furan sand. Materials. 14(14), 3803, 1-14. DOI:10.3390/ma14143803.
20] Łucarz, M., Drożyński, D., Garbacz-Klempka, A., Jezierski, J., Bartocha, D., Wróbel, T., Kostrzewa, K., Feliks, E. (2022). Influence of weather conditions and mechanical reclamation on molding sand with alkali-phenolic binder for manganese cast steel. Materials. 16(1), 71, 1-18. DOI:10.3390/ma16010071.