Microwave sintering process was employed to agglomerate ferromanganese alloy powders. The effects of sintering temperature, holding time and particle size composition on the properties and microstructure of sintering products were investigated. The results was shown that increasing sintering temperature or holding time appropriately is beneficial to increase the compressive strength and volume density. SEM and EDAX analysis shows that the liquid phase formed below the melting point in the sintering process, which leads to densification. XRD patterns indicate that the main reaction during microwave sintering is the decarbonization and carburization of iron carbide phase. The experiment demonstrate that the optimum microwave sintering process condition is 1150°C, 10 min and 50% content of the powders with the size of –75 μm

This article presents the use of a multi-criterion Analytic Hierarchy Process (AHP) method to assess

geological and mining condition nuisance in longwall mining operations in selected coal mines in Poland.

For this purpose, a methodology has been developed which was used to calculate the operational nuisance

indicator (WUe) in relation to the cost of mining coal in individual longwalls. Components of the aggregate

operational nuisance indicator include four sub-indicators: the natural hazards indicator (UZN), an

indicator describing the seam parameters (UPZ), an indicator describing the technical parameters (UT)

and an environmental impact indicator (UŚ). In total, the impact of 28 different criteria, which formed

particular components of the nuisance indicators were analysed. In total 471 longwalls in 11 coal mines

were analysed, including 277 longwalls that were mined in the period of 2011 to 2016 and 194 longwalls

scheduled for exploitation in the years 2017 to 2021.

Correlation analysis was used to evaluate the relationships between nuisance and the operating costs

of longwalls. The analysis revealed a strong correlation between the level of nuisance and the operating

costs of the longwalls under study. The design of the longwall schedule should therefore also take into

account the nuisance arising from the geological and mining conditions of the operations. Selective

operations management allows for the optimization of costs for mining in underground mines using the

longwall system. This knowledge can also be used to reduce the total operating costs of mines as a result

of abandoning the mining operations in entire longwalls or portions of longwalls that may be permanently

unprofitable. Currently, underground mines do not employ this optimization method, which even more

emphasizes the need for popularizing this approach.