In this stud y, we attempt to analyse free nonlinear vibrations of buckling in laminated composite beams. Two new methods are applied to obtain the analytical solution of the nonlinear governing equation of the problem. The effects of different parameters on the ratio of nonlinear to linear natural frequencies of the beams are studied. These methods give us an agreement with numerical results for the whole range of the oscillation amplitude.
The basic element of a project organizing construction works is a schedule. The preparation of the data necessary to specify the timings of the construction completion as indicated in the schedule involves information that is uncertain and hard to quantify. The article presents the methods of building a schedule which includes a fuzzy amount of labour, time standards and number of workers. The proposed procedure allows determining the real deadline for project completion, taking into account variable factors affecting the duration of the individual works.
Construction risk assessment is the final and decisive stage of risk analysis. When highly changeable conditions of works execution are predicted, risk should be evaluated in the favorable, moderate, and difficult random conditions of construction. Given the random conditions, the schedule and cost estimate of the construction are developed. Based on these values, the risk of final deadline delay and the risk of total cost increase of construction completion are calculated. Next, the charts of the risks are elaborated. Risk changes are shown in the charts and are analyzed in the range [1, 0].
This paper addresses the tensile and flexural strength of HPC (high performance concrete). The aim of the paper is to analyse the efficiency of models proposed in different codes. In particular, three design procedures from: the ACI 318 [1], Eurocode 2 [2] and the Model Code 2010 [3] are considered. The associations between design tensile strength of concrete obtained from these three codes and compressive strength are compared with experimental results of tensile strength and flexural strength by statistical tools. Experimental results of tensile strength were obtained in the splitting test. Based on this comparison, conclusions are drawn according to the fit between the design methods and the test data. The comparison shows that tensile strength and flexural strength of HPC depend on more influential factors and not only compressive strength.
On the 14th of February, 2015, a huge fire broke out on Łazienkowski Bridge; a five span bridge, 423 m long and 28 m wide, built in the years 1972-74. It was a fully steel structure with four plate girders and orthotropic deck. The fire started under the first span during the replacement of wooden service decks. The next day, the Department of Bridges of the Warsaw University of Technology was designated to conduct an expertise material investigation, geometrical verification, and FEM model analysis. The subject of this paper concentrates on geometrical issues. The main difficulty of this task was the lack of full reference data regarding the bridge's original structure. The old design was incomplete and there was no actual surveying results for the undamaged structure. As a conclusion, some remarks focused on surveying measurements and on the final decision regarding this bridge are given. It was eventually exchanged into a brand new one and put into public use on the 28th of October, 2015.
The dynamic development of wind power in recent years has generated the demand for production forecasting tools in wind farms. The data obtained from mathematical models is useful both for wind farm owners and distribution and transmission system operators. The predictions of production allow the wind farm operator to control the operation of the turbine in real time or plan future repairs and maintenance work in the long run. In turn, the results of the forecasting model allow the transmission system operator to plan the operation of the power system and to decide whether to reduce the load of conventional power plants or to start the reserve units.
The presented article is a review of the currently applied methods of wind power generation forecasting. Due to the nature of the input data, physical and statistical methods are distinguished. The physical approach is based on the use of data related to atmospheric conditions, terrain, and wind farm characteristics. It is usually based on numerical weather prediction models (NWP). In turn, the statistical approach uses historical data sets to determine the dependence of output variables on input parameters. However, the most favorable, from the point of view of the quality of the results, are models that use hybrid approaches. Determining the best model turns out to be a complicated task, because its usefulness depends on many factors. The applied model may be highly accurate under given conditions, but it may be completely unsuitable for another wind farm.
The problems related to construction production are multi-faceted and complex. This has promoted the search for different methods/approaches for analizing the data which supports the decision-making process in the construction industry. In the article the authors focus their attention on well-known methods and tools, and on some new approaches to solving decision-making problems. The aim of the article is to analyze the methods used to analyse data in a construction company, convey their advantages and disadvantages, and specify the degree of efficiency in the discussed area.
The paper refines Lenk’s concept of improving the performance of the computed harmonic mean estimator (HME) in three directions. First, the adjusted HME is derived from an exact analytical identity. Second, Lenk’s assumption concerning the appropriate subset A of the parameter space is significantly weakened. Third, it is shown that, under certain restrictions imposed on A, a fundamental identity underlying the HME also holds for improper prior densities, which substantially extends applicability of the adjusted HME.
A simple resistance-based method was used to study the epoxy-carbon composite material. Measurement of changes of the resistance between contacts, located on the composite specimens, allows detecting the damage process in quasi-static and fatigue tests. The method can be useful to determine the margin of safety of composite elements.
The paper presents the adaptation of the modified pulse method for investigating temperature characteristics of thermal diffusivity in the vicinity of the second-order phase transition points. The principle of the adaptation consists in the modified in relation to the original method, development of the characteristics of temperature changes between boundary surfaces of a flat-parallel specimen after the laser shot onto its front surface. The application of this adaptation was illustrated with investigation into thermal diffusivity of nickel (99.9% wt) in the temperature range of 20-380◦C. In all cases the measurement error was less than 3%, and the averaging interval for the measured values of thermal diffusivity was not greater than 1.2 K.
Several methods can be applied for analyses of the acoustic field in enclosed rooms namely: wave propagation, geometrical or statistical analysis. The paper presents problems related to application of the boundary elements method to modelling of acoustic field parameters. Experimental and numerical studies have been combined for evaluation of acoustic impedance of the material used for the walls of a model room. The experimental studies have been carried out by implementing a multichannel measuring system inside the constructed model of an industrial room. The measuring system allowed simultaneous measurements of the source parameters - the loudspeaker membrane vibration speed, the acoustic pressure values in reception points located inside the model space as well as phase shifts between signals registered in various reception points. The numerical modelling making use of the acoustic pressure values measured inside the analyzed space allowed determination of requested parameters of the surface at the space boundary.
Cephus fumipennis Eversmann is a key insect pest of wheat crops in Qinghai, China. Its field population densities were surveyed by using both the back-loaded insect vacuum and a sweep net. Mean densities in township-level were calculated and a quantitative relation, ŷ = 0.664 + 0214x, was established between the two sampling methods. The empirical relationship may be applicable in density monitoring and Integrated Pest Management program of the insect.
In the study, environmetric methods were successfully performed a) to explore natural and anthropogenic controls on reservoir water quality, b) to investigate spatial and temporal differences in quality, and c) to determine quality variables discriminating three reservoirs in Izmir, Turkey. Results showed that overall water quality was mainly governed by “natural factors” in the whole region. A parameter that was the most important in contributing to water quality variation for one reservoir was not important for another. Between summer and winter periods, difference in arsenic concentrations were statistically significant in the Tahtalı, Ürkmez and iron concentrations were in the Balçova reservoirs. Observation of high/low levels in two seasons was explained by different processes as for instance, dilution from runoff at times of high flow seeped through soil and entered the river along with the rainwater run-off and adsorption. Three variables “boron, arsenic and sulphate” discriminated quality among Balçova & Tahtalı, Balçova & Ürkmez and two variables “zinc and arsenic” among the Tahtalı & Ürkmez reservoirs. The results illustrated the usefulness of multivariate statistical techniques to fingerprint pollution sources and investigate temporal/spatial variations in water quality.