Assessment of the state of a pulse power supply requires effective and accurate methods to measure and reconstruct the tracking error. This paper proposes a tracking error measurement method for a digital pulse power supply. A de-noising algorithm based on Empirical Mode Decomposition (EMD) is used to analyse the energy of each Intrinsic Mode Function (IMF) component, identify the turning point of energy, and reconstruct the signal to obtain the accurate tracking error. The effectiveness of this EMD method is demonstrated by simulation and actual measurement. Simulation was used to compare the performance of time domain filtering, wavelet threshold de-noising, and the EMD de-noising algorithm. In practical use, the feedback of current on the prototype of the power supply is sampled and analysed as experimental data.

This paper presents a concept and the results of an investigation of a DC–DC boost converter with high voltage gain and a reduced number of switches. The novel concept assumes that the converter operates in a topology composed of series connection switched- capacitor-based multiplier (SCVM) sections. Furthermore, the structure of the sections has significant impact on parameters of the converter which is discussed in this paper. The paper demonstrates the basic benefit such a multisection SCVM idea in the converter, which is the significant reduction in the number of switches and diodes for high voltage gain in comparison to an SCVM converter. Aside from the number of switches and diodes, such parameters as efficiency and volume of passive components in the multisection converter are analyzed in this paper. In figures, the analysis is demonstrated using the example of 100 kW thyristor-based converters. All the characteristics of the converter are compared between various configurations of switching cells in the particular sections, thus the paper can be useful for a design approach for a high voltage gain multicell converter.

The present paper describes a new architecture of a high-voltage solid-state pulse generator. This generator combines the two types of energy storage systems: inductive and capacitive, and consequently operates two types of switches: opening and closing. For the opening switch, an isolated gate bipolar transistor (IGBT) was chosen due to its interesting characteristics in terms of controllability and robustness. For the closing switch, two solutions were tested: spark-gap (SG) for a powerful low-cost solution and avalanche mode bipolar junction transistor (BJT) for a fully semiconductor structure. The new architecture has several advantages: simple structure and driving system, high and stable controllable repetition rate that can reach 1 kHz, short rising time of a few nanoseconds, high gain and efficiency, and low cost. The paper starts with the mathematical analysis of the generator operation followed by numerical simulation of the device. Finally add a comma the results were confirmed by the experimental test with a prototype generator. Additionally, a comparative study was carried out for the classical SG versus the avalanche mode BJT working as a closing switch.