Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 2
items per page: 25 50 75
Sort by:
Download PDF Download RIS Download Bibtex

Abstract

In this study the current legal and market conditions of waste management in Poland are analyzed. The main legal basis for changes in the national municipal waste management system and their impact on the market situation in the last few years have been determined. Additionally, the important function of the selective collection and the key role of the separation of raw material fractions in waste sorting plants constituting the basis for the operation of Regional Municipal Waste Processing (RMWP) plants was underlined. Furthermore, the possibilities of developing electricity production technology in low and medium power modules using waste gasification techniques were emphasized. The stream of plastic mixture from municipal waste sorting was identified as problematic in the context of effective material recovery. Tests were conducted on the morphology of this waste stream from two sorting plants. In line with the literature data and as part of the analytical work, the properties of the plastic waste stream designated for recycling and the energy properties of the post-recycling plastic mixture were estimated. Tests results showed that the calorific value of this mixture reached 31.8 MJ/kg, whereas, ash and chlorine content equaled 2.7% and 1.1% of dry mass, respectively. These parameters indicate that the mixture as a high-calorific fuel component may be a valuable addition to refuse-derived fuel (RDF) produced from the over-sieve fraction of municipal waste. Concurrently, as a result of the development of waste gasification technologies with a high share of electricity production in low-medium power range plants, it is possible to integrate them with plastic recycling and RMWP plants in the Polish national waste management system.

Go to article

Authors and Affiliations

Arkadiusz Primus
Czesława Rosik-Dulewska
ORCID: ORCID
Download PDF Download RIS Download Bibtex

Abstract

The impact of mechanical pre-treatment of municipal solid waste (MSW) on its biogas production potential was examined. Mechanical separation allowed the following size-fractions to be obtained: fine fraction - mineral fraction of municipal solid waste (MFMSW) (cf> < 20 mm), middle fraction - organic fraction of municipal solid waste (OFMSW) (20 mm< cf>< 80 mm), and coarse fraction (cf>> 80 mm). The most suitable fraction for biological treatment was OFMSW, containing about 76 % of high rate biodegradable organic fraction (HRBOF). The rate constant of degradation for organic compounds in OFMSW was 0.23 d·1• It was shown that total gas production (TGP) during 10 years may achieve 550 m3/Mg OFMSW. Mechanical pre-treatment may allow an 45 % decrease of the amount of landfilled MSW resulting in a reduction of greenhouse gas emissions of up to 70 m3/Mg over 10 years of landfilling (in contrast to MSW landfilling - 213 m3/Mg). The experimental results revealed that gas production potential should be determined on the basis of HRBOF content and measurements of the biogas production.
Go to article

Authors and Affiliations

Andrzej Białowiec
Katarzyna Bernat
Irena Wojnowska-Baryła
Marek Agopsowicz

This page uses 'cookies'. Learn more