This paper shall present and explain the key aspects related to the issue of combined heat and power generation (CHP – Combined Heat and Power or Cogeneration). The cooperation with the water treatment plant launched allowed a closer look at the described technology as well as allowed the analyses and survey. The survey on the efficacy of the selected components of the cogeneration system was based on two cogeneration units fuelled with biogas produced in the sewage fermentation.

During the past several years big changes have been observed in waste water disposal, noticeable particularly in the improvement of water protection and sewage treatment. An important element of waste water disposal still requiring improvement is a low development of sewage systems in rural and urban areas. The main problem is an increasing amount of sludge, high degree of sediment hydration and considerable ability to anaerobic decomposition, a lack of areas for managing sediments near big cities and deposits of sediments on storage areas. Selected issues of waste water disposal and sludge handling in the Mazovian Province against a background of waste water disposal and sludge handling in Poland were presented in the article.

Our scientific research is based on oxidation reactions and monitoring of chemical reaction kinetics in the Velekinca groundwaters plant in Gjilan municipality, Kosovo. The GW of this plant contains high concentration of manganese so we need to use potassium permanganate (KMnO4) as one of the most power oxidants in the water treatment plant. In our re-search the high concentration of Mn in groundwaters is 0.22–0.28 mg∙dm–3 and this concentration is not in accordance with the WHO. Chlorine is one of the most common disinfectants used in the water treatment industry because it has a low cost and immediate effect on the destruction of microorganisms, the concentration of chlorine (Cl2) in our research is 0.1–0.32 mg∙dm–3. The speed of chemical reactions in the technology of GW is extremely important because sometimes in the elimi-nation of chemical pollutants using oxidizing agents often form intermediate species. The speed of reactions indicates how fast chemical bonds are formed in the creation of a product, and this depends on the rate of reaction (XA). The focus for the research is to study the potassium permanganate and chlorine gas reactions in water if it forms intermediate products (in-termediate species) due to the high speed of reactions. Scientific research conclusion, intermediate species in the oxidation reactions of Mn and water disinfection with Cl2(g) it is impossible to cause a high rate of chemical reactions from the reac-tion rate (XA = 1%) to the reaction rate (XA = 99%). The maximum speed at the highest XA Cl2 is from 4.405∙10–11 to 8.87∙10–10 mol∙dm–3∙s–1, while at Mn is (2.030–4.034)∙10–7 mol∙dm–3∙s–1.

In this research different methods for measuring water quality indices were conducted to investigate the performance of the newly designed, constructed and operated 9-Nissan water treatment plant, Iraq. Data gathering and implementation took place throughout winter and summer. Water samples were taken periodically, according to the standard method, the re-search was carried out by collecting different random samples for eight months (Jun. 2015–Jan. 2016) and measuring (tur-bidity, total hardness, pH, total dissolved solids, suspended solids, Cl–, Mg2+, Fe2+,NO3–, NH3+) for each sample. Five dif-ferent approaches and methodologies of calculating the water index were applied. The results revealed that the Water Qual-ity Indices varied from 70.55 to 88.24, when applying Canadian Council of Ministers of the Environment Water Quality Index (CCMEWQI) and British Columbia water quality index (BCWQI) geometric weighted mean respectively. All the results, from the five approaches indicated good water quality, multiple regression analyses were conducted for turbidity, total hardness and suspended solids, they found that these parameters are strongly related to each other and to other pa-rameters.

The subject of the study was to evaluate the stability and reliability of the sewage treatment plant in Nowy Sącz. The scope of the analysed indicators included the main indicators of wastewater contamination: BOD5 (biochemical oxygen demand), CODCr (chemical oxygen demand), total suspended solids (TSS), total nitrogen (Ntot), and total phosphorus (Ptot). The operation stability of the sewage treatment plant in Nowy Sącz was determined on the basis of control cards x for 24 observations made in the period 2018–2019 (2 years). Moreover, the technological reliability of the tested sewage treatment plant (WN) was determined based on the values of the analysed pollution indicators in treated sewage and their permissible values. On the basis of the conducted analyses, full stability of the removal process of most of the analysed contaminants was found. In no case was there any crossing of the control lines, only a single grouping of samples above the help line in the case of total nitrogen, which could indicate a periodical disturbance in the stability of the removal process of this compound. On the basis of the obtained values of the reliability coefficient, which were below WN = 1.00, reliable operation of the analysed facility was found, with a high degree of reduction (ƞ) of the analysed pollutants. The method of determining the technological reliability and stability of the treatment plant with the use of control cards is an effective and easy tool for detecting any disturbances and instabilities in the processes taking place in the tested facility. It enables the operator to take quick action to remove them, thus ensuring a safe wastewater treatment process for the environment and human health.

The Shatt Al Arab River (SAAR) is a major source of raw water for most water treatment plants (WTP’s) located along with it in Basrah province. This study aims to determine the effects of different variables on water quality of the SAAR, using multivariate statistical analysis. Seventeen variables were measured in nine WTP’s during 2017, these sites are Al Hussain (1), Awaissan (2), Al Abass (3), Al Garma (4), Mhaigran (5), Al Asmaee (6), Al Jubaila (7), Al Baradia (8), Al Lebani (9). The dataset is treated using principal component analysis (PCA) / factor analysis (FA), cluster analysis (CA) to the most important factors affecting water quality, sources of contamination and the suitability of water for drinking and irrigation. Three factors are responsible for the data structure representing 88.86% of the total variance in the dataset. CA shows three different groups of similarity between the sampling stations, in which station 5 (Mhaigran) is more contami-nated than others, while station 3 (Al Abass) and 6 (Al Asmaee) are less contaminated. Electrical conductivity (EC) and sodium adsorption ratio (SAR) are plotted on Richard diagram. It is shown that the samples of water of Mhaigran are locat-ed in the class of C4-S3 of very high salinity and sodium, water samples of Al Abass station, are located in the class of C3-S1 of high salinity and low sodium, and others are located in the class of C4-S2 of high salinity and medium sodium. Generally, the results of most water quality parameters reveal that SAAR is not within the permissible levels of drinking and irrigation.