@ARTICLE{Suchocki_Tomasz_Kacper_Pyrolysis-derived_2023,
 author={Suchocki, Tomasz Kacper and Kazimierski, Paweł and Januszewicz, Katarzyna and Lampart, Piotr and Zaniewski, Dawid and Klimaszewski, Piotr and Witanowski, Łukasz},
 volume={vol. 44},
 number={No 4},
 journal={Archives of Thermodynamics},
 pages={157-183},
 howpublished={online},
 year={2023},
 publisher={The Committee of Thermodynamics and Combustion of the Polish Academy of Sciences and The Institute of Fluid-Flow Machinery Polish Academy of Sciences},
 abstract={Addressing the burgeoning issue of polymer waste management and disposal, chemical recycling, specifically the production of highquality oil, presents an enticing solution. This research paper delves into the process of plastic waste pyrolysis, focusing on polypropylene, and thoroughly examines the physico-chemical properties of the resulting pyrolytic oil. The oils, obtained from waste plastic pyrolysis (referred to as WPPO), are then blended with kerosene and utilized as fuel for a gas turbine engine. The primary objective of this investigation is to ascertain how the blend composition influences the performance and emission parameters of the micro gas turbine. In our findings, it was observed that all tested waste plastic pyrolysis blends displayed a trend towards escalating regulated emissions such as nitrogen oxides (NOx) with an average increase of 26% for polypropylene pyrolysis oil (PPO). The emission index (EI) for carbon monoxide (CO) was found to be relatively consistent across all fuel blends tested in this study. Interestingly, when considering the thrust specific fuel consumption (TSFC) within the EI calculation, blends of aviation kerosene and plastic oil showed lower values in comparison to the pure Jet A-1 fuel. Furthermore, an augmentation in the proportion of WPPO in the blends consequently led to an elevation in the exhaust gas temperature (an average increase of 8.7% for PPO). Interestingly, the fuel efficiency of the Jet engine, expressed as TSFC, demonstrated a decrease, with an average reduction of 13.8% observed for PPO.},
 type={Article},
 title={Pyrolysis-derived waste polypropylene oils in gas turbine engines: a comprehensive performance and emission study},
 URL={http://www.journals.pan.pl/Content/131110/art04_617.pdf},
 doi={10.24425/ather.2023.149711},
 keywords={Waste plastic pyrolysis oil, Gas turbine engine, Polypropylene, emissions, Performance},
}