Béranger, M., Morin, G., Saanouni, S., Koster, A. & Maurel, V. (2018). Fatigue of automotive engine cylinder heads – A new model based on crack propagation. In the 12^th International Fatigue Congress (FATIGUE 2018), 27 May -1 June 2018 (pp.1-7). France: MATEC Web Conf. 165, 10013. DOI: 10.1051/matecconf/201816510013.

Choi, G.H., Choi, K.H., Lee, J.T., Song, Y.S., Ryu, Y. & Cho, J.W. (1997). Analysis of combustion chamber temperature and heat flux in a DOHC engine. SAE Technical Papers. 106, 970895, 1499-1507. DOI: https://doi.org/10.4271/970895.

Natesan, E., Eriksson, S., Ahlström, J. & Persson, C. (2020). Effect of temperature on deformation and fatigue behaviour of A356–T7 Cast aluminium alloys used in high specific power IC engine cylinder heads. Materials. 13(5), 1202, 1-27. DOI: https://doi.org/10.3390/ma13051202.

Su, X., Zubeck, M., Lasecki, J., Engler-Pinto, C.C., Tang, C., Sehitoglu, H. & Allison, J. (2002). Thermal fatigue analysis of cast aluminum cylinder heads. SAE Transactions. 111, 418-424. http://www.jstor.org/stable/44718668.

Mendes, A. & Cardoso, A. (2007). Structural analysis of the aluminum cylinder head for a high-speed diesel engine. SAE Technical Papers. 2007-01-2562. DOI: https://doi.org/10.4271/2007-01-2562.

Pesce, F. C., Vassallo, A., Beatrice, C., Di Blasio, G., Belgiorno, G., Avolio, G., Kastner, O. & Leuteritz, U. (2016). Exceeding 100 kW/l milestone: the next step towards defining high performance diesel engines. In the 25^th Aachen Colloquium Automobile and Engine Technology, 10-12 October (pp.159-183). Aachen, Germany.

Liu, L., Yan Peng, Y., Wenzheng Zhang, W. & Xiuzhen Ma, X. (2023). Concept of rapid and controllable combustion for high power-density diesel engines. Energy Conversion and Management. 276, 116529, 1-16. https://doi.org/10.1016/j.enconman.2022.116529.

Cooper, A., Stodart, A., Hancock, D., Duke, S., Miller, J. & Reader, S. (2019). Development of two new high specific output 3 cylinder engines for the global market with capacities of 1.2l and 1.5l. SAE Technical Paper. 2019-01-1193. https://doi.org/10.4271/2019-01-1193.

Wasserbäch, T., Osborne, R., Luchansky, K. & Alt, M. (2019). New spark ignition engines. Sonderprojekte ATZ/MTZ . 24(1), 38. DOI: https://doi.org/10.1007/s41491-019-0011-5.

Sjölander, E. & Seifeddine, S. (2012). The influence of natural ageing on the artificial ageing response of Al-Si-Cu-Mg casting alloys. La Metallurgia Italiana. 11-12, 39-43.

Zhao, X., Huang, W., Ren, P., Xia, P., Kuang, J. & Tang, J. (2025). Research on stress distribution and dispersion of cylinder head. Journal of Physics: Conference Series. 2992, 012033, 1-13. DOI:10.1088/1742-6596/2992/1/012033.

Shojaefard, M.H., Ghaffarpour, M.R., Noorpoor, A.R. & Alizadehnia S. (2006). Thermomechanical Analysis of an Engine Cylinder Head. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 220(5), 627-636. DOI:10.1243/09544070JAUTO182.

Wang, Q., Bobel, A., Walker, M., Hess, D., Doty, H. & Gerard, D (2025). Evaluation of two new cast aluminum alloys for high performance cylinder heads. International Journal of Metalcasting. 19, 52-58. https://doi.org/10.1007/s40962-024-01341-5

Peng Hu, P., Lei Pan, L. & Chen, X.-G. (2024). Elevated-temperature performances of Al-Si-Cu casting alloys for cylinder head applications. Materials Characterization. 218(1), 114484, 1-14. https://doi.org/10.1016/j.matchar.2024.114484.

Campbell, J. (2011). Complete casting handbook: metal casting processes, metallurgy, techniques and design. Oxford: Elsevier.

Langmayr, F. & Zieher, F. (2004).Thermomechanik in Zylinderköpfen, Ventiltrieb und Zylinderkopf. VDI Berichte. 1813, 227-243.

Tillová, E., Chalupová, M., Kuchariková, L., Belan, J., & Závodská, D. (2018). Selection of optimal solution heat treatment of the casting cylinder heads. In MATEC Web of Conferences (Vol. 157, pp. 02053). EDP Sciences.

Yuan Li, Y., Jinxiang Liu, J., Qiang Zhang, Q. & Weiqing Huang, W. (2012). Casting defects and microstructure distribution characteristics of aluminum alloy cylinder head with complex structure. Materials Today Communications. 27, 102416, 1-11. https://doi.org/10.1016/j.mtcomm.2021.102416.

Willkomm, J., Kuhlbach, K., Merget, D., Wagner, M., Reich, S., Ziegler, S. & Schleifenbaum, J. H. (2021). Design and manufacturing of a cylinder head by laser powder bed Fusion. IOP Conference Series: Materials Science and Engineering. 1097, 012021, 1-9. DOI: 10.1088/1757-899X/1097/1/012021.

Gray, J., Depcik, C., Sietins, J. M., Kudzal, A., Rogers, R. & Cho, K. (2023). Production of the cylinder head and crankcase of a small internal combustion engine using metal laser powder bed fusion. Journal of Manufacturing Processes. 97, 100-114. https://doi.org/10.1016/j.jmapro.2023.04.054.

Camicia, G. & Timelli, G. (2016). Grain refinement of gravity die cast secondary AlSi7Cu3Mg alloys for automotive cylinder heads. Transactions of Nonferrous Metals Society of China. 26(5), 1211-1221. DOI: /10.1016/S1003-6326(16)64222-X.

Dillibabu, S. P., Vasudevan, B., Megaraj, M., Palanivel, A., Durvasulu, R. & Manjunathan, K. (2023). Aluminum and its alloys in automotive and aerospace applications review Available to Purchase. AIP Conference Proceedings. 2766(1), 020027. https://doi.org/10.1063/5.0139311.

Alam T, & Ansari, A.H. (2017). Review on Aluminum and Its Alloys for automotive applications. International Journal of Advanced Technology in Engineering and Science. 5, 278-294. ISSN (2348-7550).

Hao, Z., Ju, Y. & Chen, L. (2023). Тhe use of aluminium and magnesium alloys in automotive lightweight technologies. Journal of Mechanical Science and Technology. 37, 4615-4622. https://doi.org/10.1007/s12206-023-0712-2.

Baser, T. A., Umay, E. & Akıncı, V. (2022). New trends in aluminum die casting alloys for automotive applications. The Eurasia Proceedings of Science Technology Engineering and Mathematics. 21, 79-87. https://doi.org/10.55549/epstem.1227541.

Sourav, Patil, S., Chandra, N., Kumar, N., Kumar, D. & Shetty, R. P. (2024). Analysis of mechanical properties of casted aluminium alloy for automotive safety application. Engineering Proceedings. 59(1), 157, 1-12. https://doi.org/10.3390/engproc2023059157.

Niu, G., Wang, Y., Zhu, L., Ye, J. & Mao, J. (2022). Fluidity of casting Al–Si series alloys for automotive light-weighting: a systematic review. Materials Science and Technology. 38(13), 902-911. DOI:10.1080/02670836.2022.2068274.

Mahton, Y., Jha, V. & Saha, P. (2024). Effect of heat treatment on microstructure, mechanical, and corrosion properties of Al 319.0 alloy. International Journal of Metalcasting. 18, 512-529. https://doi.org/10.1007/s40962-023-01030-9.

Vandersluis, E., Lombardi, A., Ravindran, C., Bois-Brochu, A., Chiesa, F. & MacKay, R. (2015). Factors influencing thermal conductivity and mechanical properties in 319 Al alloy cylinder heads. Materials Science & Engineering: A. 648, 401-411. https://doi.org/10.1016/j.msea.2015.09.091.

Natesan, E., Meyer, K. A., Eriksson, S., Ahlström, J. & Persson, C. (2020). Effects of dwell time on the deformation and fatigue behaviour of A356-T7 cast aluminium alloys used in high specific power ic engine cylinder heads. Materials. 13(12), 2727, 1-27. https://doi.org/10.3390/ma13122727.

Kaufman, J.G. & Rooy, E.L. (2004). Aluminium Casting Alloys. In J.G. Kaufman & E.L. Rooy (Eds.), Aluminum alloy castings: properties, processes, and applications (pp. 17-19). ASM International. Materials Park, OH.

Akar, N., Sahin, O. & Kilicli, V. (2025). Effect of two-step solution treatments on the microstructure and mechanical properties of B357 aluminum alloy. International Journal of Metalcasting. 19(1), 544-558. https://doi.org/10.1007/s40962-024-01320-w.

Rakhmonov, J., Liu, K., Pan, L., Breton, F. & Chen, X.G. (2020). Enhanced mechanical properties of high-temperature-resistant Al–Cu cast alloy by microalloying with Mg. Journal of Alloys and Compounds. 827, 154305, 1-9. DOI: 10.1016/j.jallcom.2020.154305.

Li, D., Liu, K., Rakhmonov, J. & Chen, X.G. (2021). Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys. Materials Science & Engineering: A. 827, 142090, 1-12. DOI: 10.1016/j.msea.2021.142090.

Jeong, C.-Y. (2013). High temperature mechanical properties of Al–Si–Mg–(Cu) alloys for automotive cylinder heads. Materials Transactions. 54(4), 588-594. https://doi.org/10.2320/matertrans.M2012285.

Tzeng, Y. C., Chengn, V. S., Nieh, J. K., Bor, H. Y. & Lee, S. L. (2017). Microstructure and thermal stability of A357 alloy with and without the addition of Zr. Journal of Materials Engineering and Performance. 26(11), 5511-5518. DOI: 10.1007/s11665-017-2921-2.

Menargues, S., Martín, E., Baile, M.T. & Picas, J.A. (2015). New short T6 heat treatments for aluminium silicon alloys obtained by semisolid forming. Materials Science and Engineering: A. 621, 236-242, https://doi.org/10.1016/j.msea.2014.10.078.

Pezda, J. & Jezierski, J. (2020). Non-standard T6 heat treatment of the casting of the combustion engine cylinder head. Materials. 13(18), 4114, 1-13. DOI: 10.3390/ma13184114.

Akhtar, M., Qamar, S. Z., Muhammad, M. & Nadeem, A. (2018). Optimum heat treatment of aluminum alloy used in manufacturing of automotive piston components. Materials and Manufacturing Processes. 33(16), 1874-1880. https://doi.org/10.1080/10426914.2018.1512128.

Dong, Z. Q., Wang, J. G., Guan, Z. P., Ma, P. K., Zhao, P., Li, Z. J., Lu, T.S. & Yan, R. F. (2021). Effect of short t6 heat treatment on the thermal conductivity and mechanical properties of different casting processes Al-Si-Mg-Cu alloys. Metals. 11(9), 1450, 1-11. https://doi.org/10.3390/met11091450.

VDI/VDE 2634 Blatt 2:2002-08: Optical 3D-measuring systems - Optical systems based on area scanning.

Pezda, J. (2015). Effect of shortened heat treatment on change of the R_m tensile strength of the 320.0 aluminum alloy. Archives of Foundry Engineering. 15(1), 75-78.

PN-EN ISO 6892-1:2010P: Metals. Tensile test. Part 1: Room temperature test method.

ISO 6506-1:2014. Metallic materials - Brinell hardness test - Part 1: Test method.

Chaudhury, S.K., Apelian, D., Meyer, P. Massinon, D. & Morichon, J. (2015). Fatigue performance of fluidized bed heat treated 319 alloy diesel cylinder heads. Metallurgical and Materials Transactions A. 46(7), 3015-3027. DOI: 10.1007/s11661-015-2901-9.

Samuel, F.H. (1998). Incipient melting of Al5Mg8Si6Cu2 and Al2Cu intermetallics in unmodified and strontium-modified Al–Si–Cu–Mg (319) alloys during solution heat treatment. Journal of Materials Science. 33, 2283-2297. https://doi.org/10.1023/A:1004383203476.

Sokolowski, J. H., Djurdjevic, M. B., Kierkus, C. A., & Northwood, D. O. (2001). Improvement of 319 aluminum alloy casting durability by high temperature solution treatment. Journal of Advanced Materials Processing Technology. 109(1-2), 174-180. https://doi.org/10.1016/S0924-0136(00)00793-7.

Mao, H., Bai, X., Song, F., Song, Y., Jia, Z., Xu, H., & Wang, Y. (2022). Effect of Cd on mechanical properties of Al-Si-Cu-Mg alloys under different multi-stage solution heat treatment. Materials. 15(15), 5101, 1-14. https://doi.org/10.3390/ma15155101.

Matvija, M., Kuchariková, L., Tillová, E., Chalupová, M. & Belan, J. (2017). Study of the precipitation hardening process in recycled Al-Si-Cu cast alloys. Archives of Metallurgy and Materials. 62(1), 397-403. DOI: 10.1515/amm-2017-0062.

Morin, S., Elgallad, E. M., Doty, H. W., Valtierra, S. & Samuel, F. H. (2016). Effect of Mg content and heat treatment on the mechanical properties of low pressure die-cast 380 alloy. Advances in Materials Science and Engineering. 2016(1), 7841380, 1-12, http://dx.doi.org/10.1155/2016/7841380.

Mičian, M., Kantoríková, E., Borowiecka-Jamrozek, J. & Kasińska, J. (2025). Analysis of heat treatment of AlSi7Cu0.5Mg alloy. Materials. 18(4), 733, 1-19. https://doi.org/10.3390/ma18040733.

Wang, R., Gonzalez, C. B., Stauder, B., Gutierrez, R. F., Albu, M., Sommadossi, S., Povoden-Karadeniz, E. & Poletti, M. C (2024). Influence of the heat treatment path on the precipitation sequence in an AlSi7Cu0.5Mg-alloy. Journal of Alloys and Compounds. 990, 174450, 1-13. https://doi.org/10.1016/j.jallcom.2024.174450.

Doty, H. W., Samuel, E., Samuel, A. M., Songmene, V. & Samuel, F. H. (2025). Effect of melt treatment and heat treatment on the performance of aluminum cylinder heads. Materials. 18(5), 1024, 1-25. https://doi.org/10.3390/ma18051024.

Robles Hernandez, F.C., Herrera Ramírez, J.M. & Mackay, R. (2017). Al-Si Alloys: Applications in the Automotive and Aerospace Industries. Springer International Publishing: Cham, Switzerland.

Huang, Z-X., Yan, H. & Wang, Z.-W. (2018). Microstructure and mechanical properties of strontium-modified ADC12 alloy processed by heat treatment. Journal of Central South University. 25(6), 1263-1273. https://doi.org/10.1007/s11771-018-3823-7.

Maghini, D., Bogdanoff, T., Fortini, A. & Merlin, M. (2025). In-situ investigation of a heat-treated AlSi7Cu3Mg cast alloy: influence of solidification rate on the cyclic fatigue behaviour. Materials Science and Engineering, A. 936, 148370, 1-16. DOI: https://doi.org/10.1016/j.msea.2025.148370.

De Mori, A., Timelli, G., Berto, F. & Fabrizi, A. (2020). High temperature fatigue of heat treated secondary AlSi7Cu3Mg alloys. International Journal of Fatigue. 138, 105685, 1-10. https://doi.org/10.1016/j.ijfatigue.2020.105685.

Camicia, G. & Timelli, G. (2016). Grain refinement of gravity die cast secondary AlSi7Cu3Mg alloys for automotive cylinder heads. Transactions of Nonferrous Metals Society of China. 26(5), 1211-1221. https://doi.org/10.1016/S1003-6326(16)64222-X.

Mohamed, A.M.A. & Samuel, F.H. (2012). A review on the heat treatment of Al-Si-Cu/Mg casting alloys. In F.Czerwinski (Eds.), Heat Treatment - Conventional and Novel Applications (pp. 55-72). InTech.

Wang, J., Zhu, J., Liu, Y., Peng, H. & Su, X. (2018). Effect of spheroidization of eutectic Si on mechanical properties of eutectic Al-Si alloys. Journal of Materials Research. 33(12), 1-9. DOI: 10.1557/jmr.2018.144.