The problem of harmful casting resins has been present in foundries for many years. Manufacturers are introducing new products that contain in their composition environmentally and eco-friendly ingredients. Unfortunately, not all types of technology can be used, sometimes environmental benefits are disproportionate to the quality of castings and their price. In the foundry industry, the most popular binders are based on organic compounds (often carcinogenic) and other harmful substances. Due to strict legal regulations regarding environmental protection, as well as care for the foundry's workers' comfort - their occurrence should be reduce to a minimum. These compounds often behave also depending on the conditions of use (temperature, atmosphere). The application of various methods of thermal analysis and spectroscopic methods allows to verify the mechanism of resin decomposition process in relation to conditions in the form in both inert and oxidizing atmosphere. For analysis the resins from cold-box technology, were used TG–DTG–DSC, Py-GC/MS methods and specified the course of changes occurring in combination of different atmosphere.

Mechanical reclamation process of spent moulding sands generate large amounts dusts containing mainly rubbed spent binding agents and quartz dust. The amounts of post-reclamation dusts, depending of the reclamation system efficiency and reclaim dedusting system, can reach 5 -10% in relation to the total reclaimed moulding sand. This dust due to the high content of the organic substances is a threat to the environment and therefore requires the storage on landfills specially adapted for this type of waste. On the other hand, the presence of organic substances causes that these dusts have relatively high energy values that could be used. However, at present there is no coherent, environmentally friendly concept for the management of this type of dust. The paper presents the results of tests of thermal utilization the dusts (as a source of energy) were carried out at AGH University of Science and Technology. Thermal utilization of dusts was carried out in the co-burning with carbon carriers process or in individual burning (Patent PL 227878 B1 and patent application PL - 411 902).

No-bake process refers to the use of chemical binders to bond the moulding sand. Sand is moved to the mould fill station in preparation for

filling of the mould. A mixer is used to blend the sand with the chemical binder and activator. As the sand exits the mixer, the binder

begins the chemical process of hardening. This paper presents the results of decomposition of the moulding sands with modified ureafurfuryl

resin (with the low content of furfuryl alcohol below 25 % and different activators: organic and inorganic) on a quartz matrix,

under semi-industrial conditions. Investigations of the gases emission in the test foundry plant were executed according to the method

extended in the Faculty of Foundry Engineering (AGH University of Science and Technology). Article presents the results of the emitted

chosen aromatic hydrocarbons and loss on ignition compared with the different activators used to harden this resin. On the bases of the

data, it is possible to determine the content of the emitted dangerous substances from the moulding sand according to the content of loss on

ignition.

The aim of the study was to evaluate the influence of different fillers on the chosen functional properties of experimental composites based on typical polymeric matrix, in order to understand the effect of different fillers on their properties and to develop a simple base composite for further investigations with experimental fillers, e.g. with antimicrobial properties. Previous experiments have been usually based on commercially available composites of unknown composition or compilation of monomers, without reinforcing fillers. Scanning electron microscopy was used to investigate the quality of fillers’ dispersion, which was satisfying. Results showed significant differences between materials’ diametral tensile strength (p = 0.0019), compressive strength (p < 0.0001), Vickers micro-hardness (p < 0.0001), flexural modules (p = 0.0018), and the degree of conversion (p < 0.0001), but flexural strength was not significantly different (p = 0.0583). Investigations indicated that no filler type had an especially positive impact on the mechanical properties, but reinforcement effect was achieved by proper compilation of silica nanofiller and variable glass fillers. Nanofiller decreased the degree of conversion.

The results of mechanical reclamation of waste moulding sands with furfuryl resin and activators of new generation are presented.

The aim of the research described in this study was to determine what effect the addition of reclaim obtained in the process of dry mechanical reclamation could have on the properties of furan sands.

The sand supplied by one of the domestic foundries was after the initial reclamation subjected to a two-step proper reclamation

process. The following tests were carried out on the obtained reclaim: pH, S and N content, loss on ignition and comprehensive

sieve analysis. The obtained reclaim was next used as a component of moulding sands with furfuryl resin, wherein it formed 50%

and 80% of the base moulding material, respectively. The strength properties of the ready sand mixtures (bending strength Rg u and tensile strength Rm u ) were determined after the hardening time of 0.5, 1, 2, 4 and 24 hours.

Recently, some major changes have occurred in the structure of the European foundry industry, such as a rapid development in the production of castings from compacted graphite iron and light alloys at the expense of limiting the production of steel castings. This created a significant gap in the production of heavy steel castings (exceeding the weight of 30 Mg) for the metallurgical, cement and energy industries. The problem is proper moulding technology for such heavy castings, whose solidification and cooling time may take even several days, exposing the moulding material to a long-term thermal and mechanical load. Owing to their technological properties, sands with organic binders (synthetic resins) are the compositions used most often in industrial practice. Their main advantages include high strength, good collapsibility and knocking out properties, as well as easy mechanical reclamation. The main disadvantage of these sands is their harmful effect on the environment, manifesting itself at various stages of the casting process, especially during mould pouring. This is why new solutions are sought for sands based on organic binders to ensure their high technological properties but at the same time less harmfulness for the environment. This paper discusses the possibility of reducing the harmful effect of sands with furfuryl binders owing to the use of resins with reduced content of free furfuryl alcohol and hardeners with reduced sulphur content. The use of alkyd binder as an alternative to furfuryl binder has also been proposed and possible application of phenol-formaldehyde resins was considered.

Chemical bonded resin sand mould system has high dimensional accuracy, surface finish and sand mould properties compared to green

sand mould system. The mould cavity prepared under chemical bonded sand mould system must produce sufficient permeability and

hardness to withstand sand drop while pouring molten metal through ladle. The demand for improved values of permeability and mould

hardness depends on systematic study and analysis of influencing variables namely grain fineness number, setting time, percent of resin

and hardener. Try-error experiment methods and analysis were considered impractical in actual foundry practice due to the associated cost.

Experimental matrices of central composite design allow conducting minimum experiments that provide complete insight of the process.

Statistical significance of influencing variables and their interaction were determined to control the process. Analysis of variance

(ANOVA) test was conducted to validate the model statistically. Mathematical equation was derived separately for mould hardness and

permeability, which are expressed as a non-linear function of input variables based on the collected experimental input-output data. The

developed model prediction accuracy for practical usefulness was tested with 10 random experimental conditions. The decision variables

for higher mould hardness and permeability were determined using desirability function approach. The prediction results were found to be

consistent with experimental values.

The new investigation method of the kinetics of the gas emission from moulding sands used for moulds and cores is presented in this

paper. The gas evolution rate is presented not only as a function of heating time but also as a function of instantaneous temperatures. In

relation to the time and heating temperature the oxygen and hydrogen contents in evolving gases was also measured. This method was

developed in the Laboratory of Foundry Moulds Technology, Faculty of Foundry Engineering, AGH. Gas amounts which are emitted from

the moulding sand at the given temperature recalculated to the time unit (kinetics) are obtained in investigations. Results of investigations

of moulding sand with furan resin are presented - as an example - in the paper.