Applied sciences

Bulletin of the Polish Academy of Sciences Technical Sciences

Description

The Bulletin of the Polish Academy of Sciences Technical Sciences is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred:

Artificial and Computational Intelligence,
Biomedical Engineering and Biotechnology,
Civil Engineering,
Control, Informatics and Robotics,

Electronics, Telecommunication and Optoelectronics,
Mechanical and Aeronautical Engineering, Thermodynamics,
Material Science and Nanotechnology,
Power Systems and Power Electronics.

Submit your article

Journal Metrics:

JCR Impact Factor 2023:	1.2
5 Year Impact Factor 2022:	1.1
CiteScore 2023:	2.8
SCImago Journal Rank (SJR) 2023:	0.282
Source Normalized Impact per Paper (SNIP) 2023:	0.573
Ministry of Education and Science:	100 points

Abbreviated title: Bull. Pol. Acad. Sci. Tech. Sci.

ISSN

ISSN 2300-1917

Editorial Board 2023-2025

Editor-in-Chief:

A. Rogalski, Military University of Technology

Honorary (Past) Editor-in Chief:

T. Kaczorek, Warsaw University of Technology

M.P. Kaźmierkowski, Warsaw University of Technology

Deputy Editor-in-Chief:

B. Błachowski, Institute of Fundamental Technological Research PAN

M. Mrozowski, Gdansk University of Technology

Board of Topical Co-editors:

Artificial and Computational Intelligence

S. Osowski, B. Sawicki and T. Leś, Warsaw University of Technology

Biomedical Engineering and Biotechnology

D. Pijanowska, Institute of Biocybernetics and Biomedical Engineering PAN

Civil Engineering

L. Czarnecki, Building Research Institute, ITB, Warsaw

Ł. Sadowski, Wroclaw University of Science and Technology

Control, Robotics and Informatics

J. Klamka and A. Babiarz, Silesian Technical University

J. Stefanowski, Poznan University of Technology

Electronics, Telecommunication and Optoelectronics

M. Mrozowski and A. Lamęcki, Gdansk University of Technology

Mechanical and Aeronautical Engineering, Thermodynamics

B. Błachowski, Institute of Fundamental Technological Research PAN

G. Zboiński, Institute of Fluid-Flow Machinery PAN and University of Warmia and Mazury in Olsztyn

Materials Science and Nanotechnology

B. Major and P. Czaja, Institute of Metallurgy and Materials Science PAN

Power Systems and Power Electronics

J. Rąbkowski and M. Jasiński, Warsaw University of Technology

International Editorial Advisory Board

R. Asthana, University of Wisconsin-Stout, Menomonie, USA

Xu Binshi, China Association of Plant Engineering, Beijing, P.R. China

F. Blaabjerg, Aalborg University, Denmark

C. Cecati, University of L’Aquila, Italy

A. Cichocki, RIKEN Institute, Tokyo, Japan

M. David, National Polytechnique de Toulouse, France

R. Ebner, Materials Centre Leoben, Leoben, Austria

E. Fornasini, University of Padova, Padova, Italy

L.G. Franquelo, University of Sevilla, Spain

M. Gad-el-Hak, Virginia Commonwealth University, Richmond, USA

M. Giersig, Free University of Berlin, Germany

D. van Gemert, Catholic University Leuven, KU Leuven, Belgium

L. Keviczky, Hungarian Academy of Sciences, Budapest, Hungary

V. Kučera, Czech Technical University in Prague, Prague, Czech Republic

R. Kennel, Technical University Munich, Germany

T.A. Kowalewski, Institute of Fundamental Technological Research PAN

E. Levi, Liverpool John Moore University, UK

G. Maier, Technical University of Milan, Milan, Italy

K.F. Man, City University of Hong Kong,

R. Maniewski, Institute of Biocybernetics and Biomedical Engineering PAN

H.A. Mang, Austrian Academy of Sciences, Vienna, Austria

H. Mihashi, Tohoku University, Aoba-ku, Sendai, Japan

S. Mindess, University of British Columbia, Vancouver, Canada

D.A. Mlynski, University of Karlsruhe, Karlsruhe, Germany

A.S. Nowak, University of Michigan, Ann Arbor, USA

K. Ohnishi, Keio University, Yokohama, Japan

A. Öberg, Linköping University, Linköping, Sweden

W. Pedrycz, University of Alberta, Canada

M. Razeghi, Northwestern University, Evanston, USA

J. Rodriguez, University of Andres Bello, Santiago, Chile

J.V. Sloten, Catholic University Leuven, Leuven, Belgium

B.M. Wilamowski, University of Auburn, Alabama, USA

A.L. Yarin, University of Illinois at Chicago, USA

Du Xiangwan, Chinese Academy of Engineering, China

J. Żurada, Department of Computer Engineering, University of Louisville, USA

Editorial Office:

Pałac Kultury i Nauki

Wydział IV Nauk Technicznych PAN

Pl. Defilad 1

PL 00-901 Warszawa

Managing Editor:

Renata Podraza, e-mail: Renata.Podraza@pan.pl

Finance:

Katarzyna Łasak, e-mail: Katarzyna.Lasak@pan.pl

The Bulletin of the Polish Academy of Sciences Technical Sciences is an open access journal with all content available with no charge in full text version.

The journal content is available under the licencse CC BY 4.0 https://creativecommons.org/licenses/by/4.0/.

Volumes
Instructions for authors

Select number

Content

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3

1 Contents

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3

Download PDF Download RIS Download Bibtex

2 Recent advances in structural control and health monitoring

Jan Holnicki-Szulc , David Wagg , Fabio Casciati , Lucia Faravelli , Łukasz Jankowski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145764 | DOI: 10.24425/bpasts.2023.145764

Download PDF Download RIS Download Bibtex

Authors and Affiliations

Jan Holnicki-Szulc

e-mail:

ORCID:

David Wagg

e-mail:

ORCID:

Fabio Casciati

e-mail:

ORCID:

Lucia Faravelli

e-mail:

ORCID:

Łukasz Jankowski

e-mail:

ORCID:

Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
University of Sheffield, Sheffield, United Kingdom
Zhejiang University, Hangzhou, China

3 Some recent developments in inerter-based devices for vibration mitigation

David J. Wagg

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144617 | DOI: 10.24425/bpasts.2023.144617

Keywords: inerter vibration mitigation damping

Download PDF Download RIS Download Bibtex

Abstract

Reducing the effect of unwanted vibrations is an important topic in many engineering applications. In this paper we describe some recent developments in the area of passive vibration mitigation. This is based on a new device called the inerter which can be exploited in a range of different contexts. In this paper we consider two recent examples; (i) where a flywheel inerter is combined with a hysteretic damper, and (ii) in which a pivoted bar inerter is developed for a machining application. In both cases, experimental test results show that the devices can outperform existing methods.

Go to article

Authors and Affiliations

David J. Wagg

e-mail:

ORCID:

Department of Mechanical Engineering, University of Sheffield, Sheffield, United Kingdom

4 The optimization of the TMDI for efficient mitigation of the vibration

Konrad Mnich , Przemysław Perlikowski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144619 | DOI: 10.24425/bpasts.2023.144619

Keywords: tuned mass damper inerter optimization mitigation of vibrations

Download PDF Download RIS Download Bibtex

Abstract

The paper concerns the optimization of a tuned mass damper with inerter (TMDI) based on two strategies, i.e., the minimum amplitude in the resonance peak and minimum area under the frequency response curve. The optimization is based on real, accessible parameters. Both optimization procedures are presented in two steps. In the first one, two parameters of the TMDI are tuned (inertance and damping coefficient), while in the second one, three parameters (mass, inertance, and damping coefficient). We show that both strategies give the optimum sets of parameters and allow the reduction of the amplitude of the damped system.

Go to article

Authors and Affiliations

Konrad Mnich

Przemysław Perlikowski

e-mail:

ORCID:

Division of Dynamics, Lodz University of Technology, Stefanowskiego 1/15, 90-924 Lodz, Poland

5 Flywheel proof mass actuator for active vibration control

Aleksander Kras , Paolo Gardonio

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144605 | DOI: 10.24425/bpasts.2023.144605

Keywords: inerter proof mass actuator velocity feedback

Download PDF Download RIS Download Bibtex

Abstract

This paper presents the experimental results of a new proof mass actuator for the implementation of velocity feedback control loops to reduce the flexural vibration of a thin plate structure. Classical proof mass actuators are formed by coil–magnet linear motors. These actuators can generate constant force at frequencies above the fundamental resonance frequency of the spring–magnet system, which can be used to efficiently implement point velocity feedback control loops. However, the dynamics of the spring–magnet system limit the stability and control performance of the loops when the actuators are exposed to shocks. The proof mass actuator investigated in this paper includes an additional flywheel element that improves the stability of the velocity feedback loop both by increasing the feedback gain margin and by reducing the fundamental resonance frequency of the actuator. This paper is focused on the stability and control performance of decentralized velocity feedback control loops.

Go to article

Authors and Affiliations

Aleksander Kras

e-mail:

ORCID:

Paolo Gardonio

e-mail:

ORCID:

Silencions, Bierutowska 57-59, 51-315 Wrocław, Poland
DPIA, Università di Udine, Via delle Scienze 206, 33100, Udine, Italy

6 Comparing the efficiency of different structural skeleton for base isolated domes

Sara Casciati

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e143555 | DOI: 10.24425/bpasts.2023.143555

Keywords: base isolation design requirements dome isolation device passive structural control

Download PDF Download RIS Download Bibtex

Abstract

The structural concept of the dome dates back to the Pantheon in Rome. It is used as the cover of many churches and mosques all around the world. Light solutions, with a well-visible dome-shaped truss skeleton, are often preferred in modern architecture. Base isolation techniques can be adopted to mitigate the seismic effects. This paper aims to investigate the efficiency of different designs for the truss skeleton. To solve the problem, one has to assign the constraints, the materials and the geometry of the dome, its supporting structure and the isolation devices (number, locations, and type). The screening of the effects of different scheme assumptions on structural behaviour provides a better insight into the problem.

Go to article

Authors and Affiliations

Sara Casciati

e-mail:

ORCID:

SIART srl, Pavia, Italy

7 Human-induced force reconstruction using a non-linear electrodynamic shaker applying an iterative neural network algorithm

César Peláez-Rodríguez , Álvaro Magdaleno , Sancho Salcedo-Sanz , Antolín Lorenzana

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144615 | DOI: 10.24425/bpasts.2023.144615

Keywords: ground reaction forces electrodynamic shaker artificial neural networks forces reconstruction iterative neural network

Download PDF Download RIS Download Bibtex

Abstract

An iterative neural network framework is proposed in this paper for the human-induced Ground Reaction Forces (GRF) replication with an inertial electrodynamic mass actuator (APS 400). This is a first approach to the systematization of dynamic load tests on structures in a purely objective, repeatable and pedestrian-independent basis. Therefore, an inversion-free offline algorithm based on Machine Learning techniques has been applied for the first time on an electrodynamic shaker, without requiring its inverse model to tackle the inverse problem of successful force reconstruction. The proposed approach aims to obtain the optimal drive signal to minimize the error between the experimental shaker output and the reference force signal, measured with a pair of instrumented insoles (Loadsol©) for human bouncing at different fre- quencies and amplitudes. The optimal performance, stability and convergence of the system are verified through experimental tests, achieving excellent results in both time and frequency domain.

Go to article

Authors and Affiliations

César Peláez-Rodríguez

1 2

e-mail:

ORCID:

Álvaro Magdaleno

Sancho Salcedo-Sanz

Antolín Lorenzana

Department of Signal Processing and Communications, Universidad de Alcalá, Alcalá de Henares, 28805, Spain
ITAP. Escuela de Ingenierías Industriales. Universidad de Valladolid. P.º del Cauce, 59, 47011 Valladolid, Spain

8 Ensemble of feature extraction methods to improve the structural damage classification in a wind turbine foundation

Jersson X. Leon-Medina , Núria Parés , Maribel Anaya , Diego A. Tibaduiza , Francesc Pozo

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144606 | DOI: 10.24425/bpasts.2023.144606

Keywords: structural health monitoring wind turbine foundation damage classification machine learning feature extraction XGBoost

Download PDF Download RIS Download Bibtex

Abstract

The condition monitoring of offshore wind power plants is an important topic that remains open. This monitoring aims to lower the maintenance cost of these plants. One of the main components of the wind power plant is the wind turbine foundation. This study describes a data-driven structural damage classification methodology applied in a wind turbine foundation. A vibration response was captured in the structure using an accelerometer network. After arranging the obtained data, a feature vector of 58 008 features was obtained. An ensemble approach of feature extraction methods was applied to obtain a new set of features. Principal Component Analysis (PCA) and Laplacian eigenmaps were used as dimensionality reduction methods, each one separately. The union of these new features is used to create a reduced feature matrix. The reduced feature matrix is used as input to train an Extreme Gradient Boosting (XGBoost) machine learning-based classification model. Four different damage scenarios were applied in the structure. Therefore, considering the healthy structure, there were 5 classes in total that were correctly classified. Five-fold cross validation is used to obtain a final classification accuracy. As a result, 100% of classification accuracy was obtained after applying the developed damage classification methodology in a wind-turbine offshore jacket-type foundation benchmark structure.

Go to article

Authors and Affiliations

Jersson X. Leon-Medina

1 2

e-mail:

ORCID:

Núria Parés

e-mail:

ORCID:

Maribel Anaya

e-mail:

ORCID:

Diego A. Tibaduiza

e-mail:

ORCID:

Francesc Pozo

1 5

e-mail:

ORCID:

Control, Data, and Artificial Intelligence (CoDAlab), Department of Mathematics, Escola d’Enginyeria de Barcelona Est (EEBE),Campus Diagonal-Besòs (CDB), Universitat Politècnica de Catalunya (UPC), Eduard Maristany 16, 08019 Barcelona, Spain
Programa de Ingeniería Mecatrónica, Universidad de San Buenaventura, Carrera 8H #172-20, Bogota, Colombia
Laboratori de Càlcul Numèric (LaCàN), Department of Mathematics, Escola d’Enginyeria de Barcelona Est (EEBE), Campus Diagonal-Besòs
Departamento de Ingeniería Eléctrica y Electrónica, Universidad Nacional de Colombia, Cra 45 No. 26-85, Bogotá 111321, Colombia
Institute of Mathematics (IMTech), Universitat Politècnica de Catalunya (UPC), Pau Gargallo 14, 08028 Barcelona, Spain

9 Coda wave interferometry for monitoring the fracture process of concrete beams under bending test

Magdalena Knak , Erwin Wojtczak , Magdalena Rucka

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144118 | DOI: 10.24425/bpasts.2023.144118

Keywords: non-destructive testing concrete beams crack detection fracture process ultrasonic waves coda wave interferometry digital image correlation

Download PDF Download RIS Download Bibtex

Abstract

Early detection of damage is necessary for the safe and reliable use of civil engineering structures made of concrete. Recently, the identification of micro-cracks in concrete has become an area of growing interest, especially when it comes to using wave-based techniques. In this paper, a non-destructive testing approach for the characterization of the fracture process was presented. Experimental tests were performed on concrete beams subjected to mechanical degradation in a 3-point bending test. Ultrasonic waves were registered on a specimen surface by piezoelectric transducers located at several points. Then, the signals were processed taking advantage of wave scattering due to micro-crack disturbances. For early-stage damage detection, coda wave interferometry was used. The novelty of the work concerns the application of the complex decorrelation matrix and the moving reference trace approach for better distinguishment of sensors located in different parts of a crack zone. To enhance coda wave-based damage identification results, optical imaging of crack development was performed by means of digital image correlation measurement. The results obtained showed that the coda wave interferometry technique can be successfully used as a quantitative measure of changes in the structure of concrete. The results also indicated that the course of decorrelation coefficient curves enabled the identification of three stages during degradation, and it depended on the location of acquisition points versus the crack zone.

Go to article

Authors and Affiliations

Magdalena Knak

e-mail:

ORCID:

Erwin Wojtczak

e-mail:

ORCID:

Magdalena Rucka

e-mail:

ORCID:

Department of Mechanics of Materials and Structures, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology,Narutowicza 11/12, 80-233, Gdańsk, Poland

10 Experimental dynamic damage assessment of PUFJ protected brick infilled RC building during successive shake table tests

Arkadiusz Kwiecień , Zoran Rakicevic , Jarosław Chełmecki , Aleksandra Bogdanovic , Marcin Tekieli , Łukasz Hojdys , Matija Gams , Piotr Krajewski , Filip Manojlovski , Antonio Soklarovski , Omer Faruk Halici , Theodoros Rousakis , Vachan Vanian

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144940 | DOI: 10.24425/bpasts.2023.144940

Keywords: shake table earthquake dynamic characteristics modal hammer DIC

Download PDF Download RIS Download Bibtex

Abstract

It is highly important to determine eigenvalues before and after certain extreme events that may cause damage accumulation, such as earthquake, blasts and mining or seismic tests on research models. Unique experiment design and shake table testing was performed to investigate seismic performance of a 3D RC building model with infill walls and advanced protection with polyurethane-based joints and fiber polymer reinforced light and emergency jackets. For the purpose of wider experimental activities, three methods for determination of the dynamic characteristics were used during multiple successive shake table tests following a dynamic pushover approach, and they are presented in detail. They are: inertance function through impact hammer tests, standard Fourier transformation of measured acceleration time history and digital image correlation. The expected differences in the results are related to the type and intensity of excitation used, the involvement of materials with different mechanical and physical properties, and with the different rate and extent of damage accumulation, as well as to local or global measurements. Y et, all methods lead to reliable results when a consistent methodology is being used, that takes into account locality or globality of measurements, leaving a choice for the most suitable one, depending on the site conditions. The inertance function method presented manifested its high efficiency in analysis of dynamic properties of large-scale structures and in monitoring of their changes caused by the damage and repair process. It offers quite a wide range of useful information, does not require very expensive equipment and its transportation cost is negligible. This method seems to be a proper diagnostic tool for simple experimental modal analysis of real structures and their structural elements, where detection of changes in the structural condition and in dynamic properties is required, also as a non-destructive testing and monitoring method. Digital image correlation proved to be a promising non-contact tool, strongly supporting the conventional instrumentation of shake table testing, while the Fourier transformation was used as a benchmark method yielding the most reliable results.

Go to article

Authors and Affiliations

Arkadiusz Kwiecień

e-mail:

ORCID:

Zoran Rakicevic

Jarosław Chełmecki

Aleksandra Bogdanovic

Marcin Tekieli

Łukasz Hojdys

Matija Gams

Piotr Krajewski

e-mail:

ORCID:

Filip Manojlovski

Antonio Soklarovski

Omer Faruk Halici

Theodoros Rousakis

Vachan Vanian

Faculty of Civil Engineering, Cracow University of Technology, Cracow, Poland
IZIIS, Ss. Cyril and Methodius University, Skopje, North Macedonia
Faculty of Civil and Geodetic Engineering, University of Ljubljana, Ljubljana, Slovenia
Istanbul Technical University, Istanbul, Turkey
Democritus University of Thrace, Xanthi, Greece

11 Dynamic displacement tracking in viscoelastic solids by actuation stresses: a one-dimensional analytic example involving shock waves

Hans Irschik , Michael Krommer

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144616 | DOI: 10.24425/bpasts.2023.144616

Keywords: displacement tracking eigenstrains actuation stresses linear viscoelasticity shock waves symbolic computation

Download PDF Download RIS Download Bibtex

Abstract

A one-dimensional (1D) analytic example for dynamic displacement tracking in linear viscoelastic solids is presented. Displacement tracking is achieved by actuation stresses that are produced by eigenstrains. Our 1D example deals with a viscoelastic half-space under the action of a suddenly applied tensile surface traction. The surface traction induces a uni-axial shock wave that travels into the half-space. Our tracking goal is to add to the applied surface traction a transient spatial distribution of actuation stresses such that the total displacement of the viscoelastic half-space coincides with the shock wave produced by the surface traction in a purely elastic half-space. We particularly consider a half-space made of a viscoelastic Maxwell-type material. Analytic solutions to this tracking problem are derived by means of the symbolic computer code MAPLE. The 1D solution presented below exemplifies a formal 3D solution derived earlier by the present authors for linear viscoelastic solids that are described by Boltzmann hereditary laws. In the latter formal solution, no reference was made to shock waves. Our present solution demonstrates its validity also in the presence of singular wave fronts. Moreover, in our example, we show that, as was also indicated in our earlier work, the actuation stress can be split into two parts, one of them producing no stresses, and the other no displacements in two properly enlarged problems.

Go to article

Authors and Affiliations

Hans Irschik

Michael Krommer

e-mail:

ORCID:

Institute of Technical Mechanics, Johannes Kepler University of Linz, Austria

12 Motion tracking of a rigid-flexible link robotic system in an underactuated control mode

Elżbieta Jarzębowska , Krzysztof Augustynek , Andrzej Urbaś

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144620 | DOI: 10.24425/bpasts.2023.144620

Keywords: manipulator actuator failure CoPCoD method optimization

Download PDF Download RIS Download Bibtex

Abstract

The paper presents its contribution to tracking control design of mechanical systems in underactuated mode conditions, i.e. when the number of actuators is less than the number of possible control inputs. Fully actuated mechanical systems are quite well-researched and controller designs are well-developed for them as well. However, due to costs, weight, design, and performance regimes or due to an actuator failure, the underactuated control mode is required in applications. With the aid of the computational procedure for constrained dynamics (CoPCoD), the constrained dynamics, i.e. the reference motion dynamics, and tracking control in an underactuated mode are designed for an example of a three-link planar manipulator model with rigid and flexible links. A dynamic optimization problem is formulated in the paper to obtain optimal time courses of manipulator joint coordinates in underactuated mode conditions in order to apply them to a manipulator driving links controller.

Go to article

Authors and Affiliations

Elżbieta Jarzębowska

e-mail:

ORCID:

Krzysztof Augustynek

Andrzej Urbaś

Warsaw University of Technology, Nowowiejska 24, 00-665 Warsaw, Poland
University of Bielsko-Biala, Willowa 2, 43-309 Bielsko-Biala, Poland

13 Effects of HE and ECAP processes on changes in microstructure and mechanical properties in copper, iron and zinc

Mariusz Kulczyk , Monika Skorupska , Jacek Skiba , Sylwia Przybysz , Julita Smalc-Koziorowska

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145563 | DOI: 10.24425/bpasts.2023.145563

Keywords: hydrostatic extrusion equal channel angular pressing rate of plastic deformation copper iron zinc

Download PDF Download RIS Download Bibtex

Abstract

The research presented in this paper concerns the influence of the rate of plastic deformation generated directly in the processes of severe plastic deformations on the microstructure and properties of three metals: copper, iron and zinc. The equal channel angular pressing (ECAP) method was used, and it was performed at a low plastic deformation rate of ∼ 0.04 s−1. The high plastic strain rate was obtained using the hydrostatic extrusion (HE) method with the deformation rate at the level of ∼ 170 s−1. For all three tested materials different characteristic effects were demonstrated at the applied deformation rates. The smallest differences in the mechanical properties were observed in copper, despite the dynamic recrystallization processes that occurred in the HE process. In Armco iron samples, dynamic recovery processes in the range of high plastic deformation rates resulted in lower mechanical properties. The most significant effects were obtained for pure zinc, where, regardless of the method used, the microstructure was clearly transformed into bimodal after the ECAP process, and homogenized and refined after the HE process. After the HE process, the material was transformed from a brittle state to a plastic state and the highest mechanical properties were obtained.

Go to article

Authors and Affiliations

Mariusz Kulczyk

e-mail:

ORCID:

Monika Skorupska

Jacek Skiba

Sylwia Przybysz

Julita Smalc-Koziorowska

Institute of High Pressure Physics of the Polish Academy of Sciences UNIPRESS, Sokołowska 29/37, 01-142 Warsaw, Poland

14 Electrochemical behavior and morphology of selected sintered samples of Mg65Zn30Ca4Pr1 alloy

Bartłomiej Hrapkowicz , Sabina Lesz , Aleksandra Drygała , Małgorzata Karolus , Klaudiusz Gołombek , Rafał Babilas , Julia Popis , Adrian Gabryś , Katarzyna Młynarek-Żak , Dariusz Garbiec

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145564 | DOI: 10.24425/bpasts.2023.145564

Keywords: magnesium rare-earth elements SPS corrosion

Download PDF Download RIS Download Bibtex

Abstract

In order to investigate the effect of the milling time on the corrosion resistance of the Mg65Zn30Ca4Pr1 alloy, powders of the alloy were prepared and milled for 13, 20, and 70 hours, respectively. The samples were sintered using spark plasma sintering (SPS) technology at 350◦C and pressure of 50 MPa. The samples were subjected to potentiodynamic immersion tests in Ringer’s solution at 37◦C. The obtained values of Ecorr were –1.36, –1.35, and –1.39 V, with polarization resistance Rp = 144, 189, and 101 Ω for samples milled for 13, 20 and 70 h, respectively. The samples morphology showed cracks and pits, thus signaling pitting corrosion.

Go to article

Authors and Affiliations

Bartłomiej Hrapkowicz

e-mail:

ORCID:

Sabina Lesz

e-mail:

ORCID:

Aleksandra Drygała

e-mail:

ORCID:

Małgorzata Karolus

e-mail:

ORCID:

Klaudiusz Gołombek

e-mail:

ORCID:

Rafał Babilas

e-mail:

ORCID:

Julia Popis

e-mail:

ORCID:

Adrian Gabryś

e-mail:

ORCID:

Katarzyna Młynarek-Żak

e-mail:

ORCID:

Dariusz Garbiec

Department of Engineering Materials and Biomaterials, Silesian University of Technology, ul. Konarskiego 18A, 44-100 Gliwice, Poland
Institute of Materials Engineering, University of Silesia, ul. Pułku Piechoty 75 1a, 41-500 Chorzow, Poland
Materials Research Laboratory, Silesian University of Technology, ul. Konarskiego 18a, 44-100 Gliwice, Poland
Łukasiewicz Research Network – Poznan Institute of Technology, ul. Ewarysta Estkowskiego 6, 61-755 Poznan, Poland

15 Influence of spatial distribution and the type of material on the occurrence of bandgaps in phononic crystals

Sebastian Garus , Wojciech Sochacki , Paweł Kwiatoń , Marcin Nabiałek , Jana Petrů , Mariusz Kubanek

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e144609 | DOI: 10.24425/bpasts.2023.144609

Keywords: finite difference time domain band gap phononic crystal mechanical waves propagation

Download PDF Download RIS Download Bibtex

Abstract

The study investigated the effect of the fill factor, lattice constant, and the shape and type of meta-atom material on the reduction of mechanical wave transmission in quasi-two-dimensional phononic structures. A finite difference algorithm in the time domain was used for the analysis, and the obtained time series were converted into the frequency domain using the discrete Fourier transform. The use of materials with large differences in acoustic impedance allowed to determine the influence of the meta-atom material on the propagation of the mechanical wave.

Go to article

Authors and Affiliations

Sebastian Garus

e-mail:

ORCID:

Wojciech Sochacki

e-mail:

ORCID:

Paweł Kwiatoń

e-mail:

ORCID:

Marcin Nabiałek

e-mail:

ORCID:

Jana Petrů

e-mail:

ORCID:

Mariusz Kubanek

e-mail:

ORCID:

Faculty of Mechanical Engineering and Computer Science, Department of Mechanics and Fundamentals of Machinery Design, Czestochowa University of Technology, Dąbrowskiego 73, 42-201 Częstochowa, Poland
Faculty of Production Engineering and Materials Technology, Department of Physics, Czestochowa University of Technology, Armii Krajowej 19, 42-201 Częstochowa, Poland
Department of Machining, Assembly and Engineering Metrology, Faculty of Mechanical Engineering, VSB-Technical University of Ostrava,70833 Ostrava, Czech Republic
Faculty of Mechanical Engineering and Computer Science, Department of Computer Science, Czestochowa University of Technology, Dąbrowskiego 73, 42-201 Częstochowa, Poland

16 Towards mass customisation: automatic processing of orders for residential ship’s containers - A case study example

Adam Dudek , Justyna Patalas-Maliszewska , Jacek Frączak

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145562 | DOI: 10.24425/bpasts.2023.145562

Keywords: mass customization residential shipping containers natural language processing automatic processing of orders

Download PDF Download RIS Download Bibtex

Abstract

Along with changes in customer expectations, the process of ordering a house, especially one built with the most modern technology from prefabricated HQ 40-foot shipping containers, should take place in an atmosphere of free-flowing, customer-friendly conversation. Therefore, it is important that the company producing such a solution has a tool supporting such offers and orders when producing personalized solutions. This article provides an original approach to the automatic processing of orders based on an example of orders for residential shipping containers, natural language processing and so-called premises developed. Our solution overcomes the usage of records of the conversations between the customer and the retailer, in order to precisely predict the variant required for the house ordered, also when providing optimal house recommendations and when supporting manufacturers throughout product design and production. The newly proposed approach examines such recorded conversations in the sale of residential shipping containers and the rationale developed, and then offers the automatic placement of an order. Moreover, the practical significance of the solution, thus proposed, was emphasized thanks to verification by a real residential ship container manufacturing company in Poland.

Go to article

Authors and Affiliations

Adam Dudek

e-mail:

ORCID:

Justyna Patalas-Maliszewska

e-mail:

ORCID:

Jacek Frączak

University of Applied Sciences in Nysa, Armii Krajowej 7, 48-300 Nysa, Poland
University of Zielona Góra, ul. Licealna 9,65-417 Zielona Góra, Poland
Sanpol Sp. z o.o, Sulechowska 27a, 65-119, Zielona Góra, Poland

17 Algorithm for solution of systems of singularly perturbed differential equations with adifferential turning point

Valentyn Sobchuk , Iryna Zelenska , Oleksandr Laptiev

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145682 | DOI: 10.24425/bpasts.2023.145682

Keywords: small parametr turning point singular perturbations asymptotics Airy-Langer functions

Download PDF Download RIS Download Bibtex

Abstract

The dynamic development of science requires constant improvement of approaches to modeling physical processes and phenomena. Practically all scientific problems can be described by systems of differential equations. Many scientific problems are described by systems of differential equations of a special class, which belong to the group of so-called singularly perturbed differential equations. Mathematical models of processes described by such differential equations contain a small parameter near the highest derivatives, and it was the presence of this small factor that led to the creation of a large mathematical theory. The work proposes a developed algorithm for constructing uniform asymptotics of solutions to systems of singularly perturbed differential equations.

Go to article

Authors and Affiliations

Valentyn Sobchuk

e-mail:

ORCID:

Iryna Zelenska

e-mail:

ORCID:

Oleksandr Laptiev

e-mail:

ORCID:

Taras Shevchenko National University of Kyiv, Ukraine

18 Handling high and low priority traffic in multi-layer networks

Edyta Biernacka , Piotr Boryło , Piotr Jurkiewicz , Robert Wójcik , Jerzy Domżał

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145568 | DOI: 10.24425/bpasts.2023.145568

Keywords: elastic optical resources high priority traffic multi-layer networks priority-aware bypasses

Download PDF Download RIS Download Bibtex

Abstract

In this paper, we propose a novel priority-aware solution named bypass to handle high- and low-priority traffic in multi-layer networks. Our approach assumes diversification of elastic optical spectrum to ensure additional resources reserved for emergency situations. When congestion occurs, the solution dynamically provides new paths, allocating a hidden spectrum to offload traffic from the congested links in the IP layer. Resources for a bypass are selected based on traffic priority. High-priority traffic always gets the shortest bypasses in terms of physical distance, which minimizes delay. Bypasses for low-priority traffic can be established if the utilization of the spectrum along the path is below the assumed threshold. The software-defined networking controller ensures the global view of the network and cooperation between IP and elastic optical layers. Simulation results show that the solution successfully reduces the amount of rejected high-priority traffic when compared to regular bypasses and when no bypasses are used. Also, overall bandwidth blocking probability is lower when our priority-aware bypasses are used.

Go to article

Authors and Affiliations

Edyta Biernacka

e-mail:

ORCID:

Piotr Boryło

e-mail:

ORCID:

Piotr Jurkiewicz

e-mail:

ORCID:

Robert Wójcik

e-mail:

ORCID:

Jerzy Domżał

e-mail:

ORCID:

Institute of Telecommunications, AGH University of Science and Technology, Kraków, Poland

19 Simulation of a cylindrical glass dome negative impact on a 360o field of view 2D laser scanner performance and a method for correction

Jacek Wojtanowski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145566 | DOI: 10.24425/bpasts.2023.145566

Keywords: laser scanner laser range finder laser terrestrial scanning

Download PDF Download RIS Download Bibtex

Abstract

Although laser scanning ideas and hardware solutions are well-known to experts in the field, there is still a large area for optimization. Especially, if long-range and high-resolution scanning is considered, the smallest defects in optical quality should be perfected. On the other hand, the simplicity, reliability, and finally the cost of the solution plays an important role, too. In this paper, a very simple but efficient method of optical correction is presented. It is dedicated to laser scanners operating from inside cylindrical glass domes. Such covers normally introduce aberrations into both the laser beam and receiving optics. If these effects are uncorrected, the laser scanner performance is degraded both in terms of angular resolution and maximum range of operation. It may not be critical for short-range scanning applications; however, if more challenging concepts are considered, this issue becomes crucial. The proposed method does not require sophisticated optical solutions based on aspheric or freeform components, which are frequently used for similar purposes in imaging-through-dome correction but is based on a simple cylindrical refractive correction plate.

Go to article

Authors and Affiliations

Jacek Wojtanowski

e-mail:

ORCID:

Institute of Optoelectronics, Military University of Technology, ul. gen. Sylwestra Kaliskiego 2, 00-908 Warsaw, Poland

20 An efficient microgrid model based on Markov fuzzy demand-side management

G. K. Jabash Samuel , M. S. Sivagama Sundari , R. Bhavani , A. Jasmine Gnanamalar

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145569 | DOI: 10.24425/bpasts.2023.145569

Keywords: smart grid non-linear model predictive controller fuzzy Markov decision process power scheduling operating cost

Download PDF Download RIS Download Bibtex

Abstract

Today’s electricity management mainly focuses on smart grid implementation for better power utilization. Supply-demand balancing, and high operating costs are still considered the most challenging factors in the smart grid. To overcome this drawback, a Markov fuzzy real-time demand-side manager (MARKOV FRDSM) is proposed to reduce the operating cost of the smart grid system and maintain a supply-demand balance in an uncertain environment. In addition, a non-linear model predictive controller (NMPC) is designed to give a global solution to the non-linear optimization problem with real-time requirements based on the uncertainties over the forecasted load demands and current load status. The proposed MARKOV FRDSM provides a faster scale power allocation concerning fuzzy optimization and deals with uncertainties and imprecision. The implemented results show the proposed MARKOV FRDSM model reduces the cost of operation of the microgrid by 1.95%, 1.16%, and 1.09% than the existing method such as differential evolution and real coded genetic algorithm and maintains the supply-demand balance in the microgrid.

Go to article

Authors and Affiliations

G. K. Jabash Samuel

e-mail:

ORCID:

M. S. Sivagama Sundari

R. Bhavani

A. Jasmine Gnanamalar

Department of Electrical and Electronics Engineering, Rohini College of Engineering and Technology, Kanyakumari, India
Department of Electrical and Electronics Engineering, Amrita College of Engineering and Technology, Nagercoil, India
Department of Electrical and Electronics Engineering, Mepco Schlenk Engineering College, Sivakasi-626004, India
Department of Electrical and Electronics Engineering, PSN College of Engineering and Technology, Anna University, India

21 Impact of thermal backfill parameters on current-carrying capacity of power cables installed in the ground

Seweryn Szultka , Stanisław Czapp , Adam Tomaszewski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145565 | DOI: 10.24425/bpasts.2023.145565

Keywords: current-carrying capacity numerical simulations power cables thermal analysis

Download PDF Download RIS Download Bibtex

Abstract

Proper design of power installations with the participation of power cables buried in homogeneous and thermally well-conductive ground does not constitute a major problem. The situation changes when the ground is non-homogeneous and thermally low-conductive. In such a situation, a thermal backfill near the cables is commonly used. The optimization of thermal backfill parameters to achieve the highest possible current-carrying capacity is insufficiently described in the standards. Therefore, numerical calculations based on computational fluid dynamics could prove helpful for designers of power cable lines. This paper studies the influence of dimensions and thermal resistivity of the thermal backfill and thermal resistivity of the native soil on the current-carrying capacity of power cables buried in the ground. Numerical calculations were performed with ANSYS Fluent. As a result of the research, proposals were made on how to determine the current-carrying capacity depending on the dimensions and thermal properties of the backfill. A proprietary mathematical function is presented which makes it possible to calculate the cable current-carrying capacity correction factor when the backfill is used. The research is expected to fill the gap in the current state of knowledge included in the provisions of standards.

Go to article

Authors and Affiliations

Seweryn Szultka

e-mail:

ORCID:

Stanisław Czapp

e-mail:

ORCID:

Adam Tomaszewski

e-mail:

ORCID:

Faculty of Electrical and Control Engineering, Gdansk University of Technology, Narutowicza 11/12, 80-233 Gdansk, Poland
Institute of Fluid-Flow Machinery, Polish Academy of Sciences, Fiszera 14, 80-231 Gdansk, Poland

22 Optimization programming tools supporting supply chain management

Joanna Szkutnik-Rogoż , Jerzy Małachowski

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145570 | DOI: 10.24425/bpasts.2023.145570

Keywords: mathematical programming optimization supply chain

Download PDF Download RIS Download Bibtex

Abstract

The issue of transportation is a particular type of mathematical programming that facilitates searching for and determining an optimal distribution network, considering the set of suppliers and recipients. This paper uses a numerical example to present a solution to a transport problem utilizing classical computation methods, i.e., the northwest corner, the least cost in a matrix, and the VAM approximation method. The objective of the paper was to develop tools in the form of algorithms that would then be implemented in three various computing environments (R, GNU Octave, and Matlab) that allow us to optimize transport costs within an assumed supply network. The model involved determining decision variables and indicating limiting conditions. Furthermore, the authors interpreted and visualized the obtained results. The implementation of the proposed solution enables users to determine an optimal transport plan for individually defined criteria.

Go to article

Authors and Affiliations

Joanna Szkutnik-Rogoż

e-mail:

ORCID:

Jerzy Małachowski

e-mail:

ORCID:

Military University of Technology, Cybernetics Faculty, gen. Kaliskiego 2, 00-908 Warsaw, Poland
Military University of Technology, Faculty of Mechanical Engineering, gen. Kaliskiego 2, 00-908 Warsaw, Poland

23 Sub-optimal motion planning of one-chained, two-input nonholonomic systems

Ignacy Duleba , Iwona Karcz-Duleba

Bulletin of the Polish Academy of Sciences Technical Sciences | 2023 | 71 | 3 | e145684 | DOI: 10.24425/bpasts.2023.145684

Keywords: nonholonomic systems chained form optimization algorithm Lie algebraic method

Download PDF Download RIS Download Bibtex

Abstract

In this paper three algorithms of motion planning for two-input, one-chained nonholonomic systems are presented. The classical Murray-Sastry algorithm is compared with two original algorithms aimed at optimizing energy of controls. Based on the generalized Campbell- Baker-Hausdorff-Dynkin formula applied to the systems, some observations are made concerning the optimal relationship between amplitudes and phases of harmonic controls. The observations help to optimize a selection of controls and to design new algorithms for planning a sub- optimal trajectory between given boundary configurations. It was also shown that for those particular systems the generalized C-B-H-D formula is valid not only locally (as in a typical case) but also globally. Simulations performed on the five-dimensional chain system facilitate distinguishing the proposed algorithms from the Murray-Sastry algorithm and to illustrate their features. Systems in a chained form are important from a practical point of view as they are canonical for a class of systems transformable into this form. The most prominent among them are mobile robots with or without trailers.

Go to article

Authors and Affiliations

Ignacy Duleba

e-mail:

ORCID:

Iwona Karcz-Duleba

e-mail:

ORCID:

Department of Cybernetics and Robotics
Department of Control Systems and Mechatronics Wroclaw University of Science and Technology, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, Poland