Nauki Techniczne

Archives of Civil Engineering

Zawartość

Archives of Civil Engineering | 2019 | Vol. 65 | No 4

Abstrakt

The study investigates the axial load behaviour of concrete filled battened steel columns not covered by the design standards. A series of full scale tests on two I-sections connected together with intermediate batten plates and filled with concrete were carried out. The main parameters varied in the tests are length of the members and strength of the concrete filling. One bare steel member was also tested and results were compared with those filled with concrete. The tests results were illustrated by load-strain curves. The main objectives of these tests were twofold: first, to describe behaviour of new steel-concrete columns and second, to analyze the influence of slenderness on load-carrying capacity.

Przejdź do artykułu

Autorzy i Afiliacje

M. Siennicki

Abstrakt

As the dynamic behavior of the concrete is different from that under static load, this research focuses on the study of dynamic responses of concrete by simulating the split Hopkinson pressure bar (SHPB) test. Finite element code LS-DYNA is used for modeling the dynamic behaviors of concrete. Three continuous models are reviewed and the Holmquist-Johnson-Cook model (HJC) is introduced in detail. The HJC model which has been implemented in LS-DYNA is used to represent the concrete properties. The SHPB test model is established and a few stress waves are applied to the incident bar to simulate the dynamic concrete behaviors. The stress-strain curves are obtained. The stress distributions are analyzed. The crack initiation and propagation process are described. It is concluded that: the HJC model can modeling the entire process of the fracture initiation and fragmentation; the compressive of the concrete is significantly influenced by the strain rates.

Przejdź do artykułu

Autorzy i Afiliacje

H.M. An
L. Liu

Abstrakt

The aim of the paper is to assess the values of shear (delaminating) stress in the composition plane between the concrete (RC) deck slab and wood girder from concrete shrinkage, and shrinkage and swelling of wood, as well as difference in temperature between the wood web and concrete slab.

Przejdź do artykułu

Autorzy i Afiliacje

K. Furtak

Abstrakt

The article discusses the basic issues related to the technology of friction stir welding (FSW). A short description of technology is provided. The following section provides the analysis of effect of technological parameters (tool rotation and welding speed) on the mechanical properties of the prepared joint (strength, ductility, microhardness). In both cases the analysis refers to aluminum alloys (6056 and AA2195-T0). The comparative analysis showed the phenomenon of the increase in weld strength along with the increase in the rotational speed of the tool during welding. Similarly, with the increase in welding speed, an increase in weld strength was observed. Some exceptions have been observed from the above relations, as described in the article. In addition, examples of material hardness distribution in the joint are presented, indicating their lack of symmetry, caused by the rotational movement of the tool. The analyses were performed basing on the literature data.

Przejdź do artykułu

Autorzy i Afiliacje

P.G. Kossakowski
W. Wciślik
M. Bakalarz

Abstrakt

The recycle of the building and demolition waste could reduce project expenses and save natural resources as well as solve problem about environmental risks incurred during the disposal of building waste. In this study, waste C30 concrete is taken an experimental material. The mass loss, ultrasonic velocity, dynamic modulus of elasticity and cubic compressive strength of recycled coarse aggregate concrete whose coarse aggregate replacement percentage is 25%, 50%, 75%, and 100% are tested and compared with NAC when the cycles of freezing and thawing are 0, 25, 50, 75, 100, 125, 150, 175, and 200 times. The results show: (1) Generally, the loss of mass, ultrasonic velocity, dynamic modulus of elasticity and cubic compressive strength constantly increase with the growth of freezing and thawing cycles. (2) Compared with the recycled concrete of other replacement percentages, the RAC50 shows relatively close performance to NAC in mass loss, the change of dynamic modulus of elasticity and cubic compressive strength. (3) Performances of RAC25 specimens are better than the other RAC specimens for the ultrasonic wave velocity.

Przejdź do artykułu

Autorzy i Afiliacje

Xianghui Deng
ORCID: ORCID
Liyuan Xue
Rui Wang
ORCID: ORCID
Xiaoyue Gao

Abstrakt

The authors developed the definition of construction defect and fault and construction defect management based on Polish and foreign publications. In order to assist identification of faults and their analysis in the process of home collection, the authors applied the Case Based Reasoning (CBR) method. In the paper, the authors used Case Based Reasoning (CBR) to support acceptance of apartments. The CBR method allows to determine the magnitude of global similarity for the problem under consideration between the new and old case from the Case Base, using weighted sums of local similarities using criteria weights as coefficients. As a result of CBR-based solutions, an Employer’s representative receives information about the type of construction defects that can be expected, their location and significance, occurrence frequency, and estimated repair cost.

Przejdź do artykułu

Autorzy i Afiliacje

K. Zima
S. Biel

Abstrakt

The paper presents the method of simplified parametric analysis of the sensitivity of a pre-tensioned concrete beam. The presented approach is based on the DOE (design of experiments) data collection which is simulation technique allowing for identification of variables deciding about the effectiveness and costs of designed structures. Additionally, application of the hyper-surface of the construction response allows designers to the development of multi-dimensional trade-off graphs to facilitate, the assessment of the scope of changes in random state variables permitted due to the adequate criteria and selection of their values close to optimum. Design basics, procedures and results of the presented considerations of sensitivity assessment and reliability of the structure has been shown on the example of a pre-stressed concrete beam designed in accordance with the requirements and procedures of Eurocode 2.

Przejdź do artykułu

Autorzy i Afiliacje

Sz. Woliński
T. Pytlowany

Abstrakt

The paper deals with determination of flexural resistance buckling curves for welded I-section steel members made of high strength steel (S 690). In the paper the previously proposed BF analytical model is used for approximation of FEM results obtained using moderately large deformation shell theory and ABAQUS/Standard software. Final formulation of flexural resistance buckling curves is possible through the use of the Merchant-Rankine-Murzewski approach adopted extensively in the authors’ previous papers. For nonlinear optimization, which is needed for analytical model parameters determination, the Wolfram Mathematica package is used. Obtained results for S 690 steel are presented against the results for S 355 steel.

Przejdź do artykułu

Autorzy i Afiliacje

M.D. Gajewski
M.A. Giżejowski
R.B. Szczerba

Abstrakt

Experimental tests of steel unstiffened double side bolted end-plate joints have been presented. The main aim of the conducted tests was to check the behavior of joints in an accidental situation and possibility of creating secondary mechanism, i.e. catenary action in the scenario of column loss. Two types of end plate joints were tested: flush end-plate (FP) and extended end-plate (EP) with different thickness and different number of bolt rows in each. The tests were carried out on an isolated cross beam-column-beam type system until joint failure. During tests the available moment resistance and rotation capacity of bending joints and also values of tension forces in the beam were determined. The joints with extended end-plate have demonstrated higher bending and rotational capacity than flush end-plate. Significant deformation of column flanges, web and end plate were observed. The fracture of bolts was the failure mode of joints. Obtained results of axial force values in beam exceeded standard requirement what confirmed that the joints with unstiffened web column, flush or extended end-plate possess the ability of development the catenary action.

Przejdź do artykułu

Autorzy i Afiliacje

Aleksander Kozłowski
Damian Kukla
ORCID: ORCID

Abstrakt

This paper investigates the influence of isolation systems on the seismic behavior of urban reinforce concrete bridge. The performance of the Hesarak Bridge constructed in Karaj city, Iran with two isolation systems; i.e. the existing elastomeric rubber bearing (ERB) and a proposed lead rubber bearing (LRB) is discussed. The numerical model was implemented in the well-known FEM software CSIBridge. The isolated bridge has been analyzed using nonlinear time history analysis method with seven pairs of earthquake records and the results are compared for the two isolation systems. The LRB isolators are shown to have superior seismic performance in comparison with the existing ERB systems based on the response evaluation including force on the isolator, pier base shear, deck acceleration, bending moment, pier displacement, and energy dissipation.

Przejdź do artykułu

Autorzy i Afiliacje

Ali Akbar Edalati
Hossein Tahghighi

Abstrakt

A lot of heat will generate in mass concrete after pouring to form temperature cracks, which will reduce structural stiffness. This paper briefly introduces the principle of solid heat conduction and the cause of temperature crack formation and then used COMSOL software to simulate and analyze the mass concrete. The results showed that the simulation model had enough reliability to analyze the temperature change; the internal and external temperature of concrete rose first and then decreased; the formation of temperature crack was related to the internal and external temperature difference; the internal and external temperature difference was inversely proportional to the heat conductivity coefficient of concrete and directly proportional to the pouring temperature. Then, according to the analysis results, two measures were put forward to prevent temperature cracks in mass concrete: selecting concrete materials with high thermal conductivity, i.e., selecting coarse aggregate and fine aggregate with larger heat conductivity coefficient and reducing concrete pouring temperature, i.e., selecting cement with lower hydration heat, paying attention to temperature reduction in the process of concrete stirring, and reducing the amount of cement.

Przejdź do artykułu

Autorzy i Afiliacje

L. Guo

Abstrakt

This study analyzed the role of PERFORM 3D in the preliminary evaluation of seismic performance of engineering structures. Firstly, PERFORM 3D was briefly introduced, and its material constitutive model and basic model were analyzed. Then, taking a high-rise building project in Yulin, Shaanxi, China, as an example, PERFORM 3D was used to evaluate its seismic performance. After establishing the engineering model, five seismic waves were selected for simulation. The results showed that the maximum values of X-axis inter-story displacement angle and Y-axis displacement angle were 1/500 and 1/360 respectively, which were far less than the standard limit; the overall energy dissipation was good, the damping was small, the overall deformation was good, and the seismic performance was also good. In conclusion, PERFORM 3D has a good performance in the preliminary evaluation of seismic performance of engineering, and it is worth further promotion and application.

Przejdź do artykułu

Autorzy i Afiliacje

Dongmei Li

Abstrakt

The aim of the research is laboratory investigation of aluminium brackets employed to fasten lightweight curtain walls to building facilities. Tensile loads perpendicular to end plates (vertical) were applied here. The author focused on the solutions intended to increase the load-carrying capacity of aluminium brackets applying the plain washer form A (DIN 125; ISO 7089), plain washer with an outer diameter about 3d (DIN 9021; ISO 7093) and additional cover plates (straps) in the location of bolt anchoring on the base plate. The aluminium brackets were tested on a steel base and concrete substrate. The flexibility of anchoring strongly affects the increase of the end plate middle point displacement and movable crosshead displacement.

Przejdź do artykułu

Autorzy i Afiliacje

A. Ambroziak

Abstrakt

The paper presents an analysis of the behaviour of bent reinforced concrete beams strengthened with CFRP laminates fixed with adhesive before and after unloading, and more importantly, an analysis of the work of reinforced concrete beams strengthened with pre-stressed CFRP laminates fixed with adhesive. The analyses were based on a moment-curvature model prepared by the author for reinforced concrete beams strengthened under load with pre-stressed CFRP laminates. The model was used to determine the effect of compression with CFRP laminates and their mechanical properties on the effectiveness of strengthening the reinforced concrete beams analysed in this study.

Przejdź do artykułu

Autorzy i Afiliacje

J. Korentz

Abstrakt

The research was aimed at analysing the factors that affect the accuracy of merging point clouds when scanning over longer distances. Research takes into account the limited possibilities of target placement occurring while scanning opposite benches of quarries or open-pit mines, embankments from opposite banks of rivers etc. In all these cases, there is an obstacle/void between the scanner and measured object that prevents the optimal location of targets and enlarging scanning distances. The accuracy factors for cloud merging are: the placement of targets relative to the scanner and measured object, the target type and instrument range. Tests demonstrated that for scanning of objects with lower accuracy requirements, over long distances, it is optimal to choose flat targets for registration. For objects with higher accuracy requirements, scanned from shorter distances, it is worth selecting spherical targets. Targets and scanned object should be on the same side of the void.

Przejdź do artykułu

Autorzy i Afiliacje

G. Lenda
P. Lewińska
J. Siwiec

Abstrakt

New computational procedures developed within the framework of international research projects „Grispe” and „Grispe Plus” are briefly presented and characterised here. Considered algorithms pertain to the verification of bearing capacity and serviceability of selected bearing structure components erected with especially shaped thinwalled sheet metal panels. Structural components of this type are so far rather absent from the codes, and as a result the unequivocal design requirements have not been developed for them. Key problems related to the detailed analysis of the following element classes: steel decks with embossments, indentations and/or outwards stiffeners; liner trays; corrugated sheeting; curved profiles; cladding and roof profile assemblies; perforated and holed profiles; external interlocking planks and their assemblies are indicated in the text. The procedures formulated as a part of the projects indicated above have been delivered to CEN as an official proposal of amendments and/or additions submitted for introduction to the new generation of Eurocodes currently under preparation, and especially as an extension to the code EN 1993-1-3.

Przejdź do artykułu

Autorzy i Afiliacje

M. Maslak
M. Pazdanowski

Abstrakt

Construction and demolition (C&D) waste management should be accordance with the waste management hierarchy. In practice, C&D waste are often downcycling. It is the result of many factors, including lack of awareness about the value inherent in waste. The paper presents analysis of the adaptability of non-destructive testing (NDT) methods for technical assessment of waste properties. As part of the work, non-destructive testing methods were described and classified in accordance with material and the features they enable testing. The publication presents examples of the use of NDT in the recovery of building materials during construction projects, in the field of influence of technical information of waste on the way it is managed. Finally, a scheme of waste management process during the renovation of an object with the application of NDT methods was presented.

Przejdź do artykułu

Autorzy i Afiliacje

J. Jaskowska-Lemańska
J. Sagan

Abstrakt

The paper concerns a strength optimization of continuous beams with variable cross-section. The continuous beams are subjected to a dead weight and a useful load, the six (seven) combinations of loads were analyzed. Optimal design problems in structural mechanics can by mathematically formulated as optimal control tasks. To solve the above formulated optimization problems, the minimum principle was applied. The paper is an introductory and survey paper of the treatment of realistically modelled optimal control problems from application in the structural mechanics. Especially those problems are considered, which include different types of constraints. The optimization problem is reduced to the solution of multipoint boundary value problems (MPBVP) composed of differential equations. Dimension of MPBVP is usually a large number, what produces numerical difficulties. Optimal control theory does not give much information about the control structure. The correctness of the assumed control structure can be checked after obtaining the solution of the boundary problem.

Przejdź do artykułu

Autorzy i Afiliacje

Leszek Mikulski
ORCID: ORCID

Abstrakt

Most construction projects involve subcontracting some work packages. A subcontractor is employed on the basis of their bid as well as according to their availability. A viable schedule must account for resource availability constraints. These resources (e.g. crews, subcontractors) engage in many projects, so they become at the disposal for a new project only in certain periods. One of the key tasks of a planner is thus synchronizing the work of resources between concurrent projects. The paper presents a mathematical model of the problem of selecting subcontractors or general contractor’s crews for a time-constrained project that accounts for the availability of contractors, as well as for the cost of subcontracting works. The proposed mixed integer-binary linear programming model enables the user to perform the time/cost trade-off analysis.

Przejdź do artykułu

Autorzy i Afiliacje

S. Biruk
P. Jaskowski
M. Krzemiński

Abstrakt

In the paper an alternative method for increasing punching shear resistance of the flat slabs from lightweight aggregate concrete by means of hidden steel fibre reinforced capital was presented. Previous experimental studies demonstrated that the addition of steel fibres to concrete allows for increase in the punching shear resistance of flat slab. Steel fibres modify the tensile strength of concrete, which translates into increased ductility of the material. The results of the experimental investigations were presented, the aim of which was to assess the effectiveness of the proposed solution. For economic and technological reasons, a hidden capital of a height equal to half of the slabs depth was made so that the top reinforcement could be installed later. It was found that presented solution allowed to increase the load carrying capacity by about 36% with respect to the control element, made entirely of lightweight aggregate concrete.

Przejdź do artykułu

Autorzy i Afiliacje

M. Gołdyn
T. Urban

Zasady etyki publikacyjnej

ETHICS POLICY

”Archives of Civil Engineering” respects and promotes the principles of publishing ethics. Being guided by COPE’s Guidelines ( https://publicationethics.org/resources/guidelines) we ensure that all participants of the publishing process comply with these rules, the journal pays special attention to:

Editor Responsibilities
1. Qualifying individual manuscripts for publication only on the basis of: (a) compliance with the guidelines provided to the authors, (b) substantive value, (c) originality, (d) transparency of presentation
2. Deciding whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published. In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
3. Evaluating manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
4. Ensuring scientific accuracy and complying with the principle of authorship; making sure that individual authors who contribute to the publication accept its form after the scientific editing
5. Providing a fair and appropriate peer review process.
6. Withdrawing manuscripts from publication, if any information about its unreliability appeared, also as a result of unintentional errors, features of plagiarism or violation of the rules of publishing ethics were identified.
7. Requiring all contributors to disclose relevant competing interests and publish corrections if competing interests are revealed after publication. If needed, other appropriate action should be taken, such as the publication of a retraction or expression of concern.
8. Maintaining the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
9. Not disclosing any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

Reviewer Responsibilities
1. Cooperating with the scientific editor and / or editorial office and the authors in the field of improving the reviewed material;
2. Being objective and expressing the views clearly with appropriate supporting arguments.
3. Assessing of the entrusted works in a careful and objective manner, if possible with an assessment of their scientific reliability and with appropriate justification of the comments submitted;
4. identifying relevant published work that has not been cited by the authors
5. calling to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge
6. Maintaining the principle of fair play, excluding personal criticism of the author (s)
7. Maintaining confidentiality, which is not showing or discussing with others except those authorized by the editor. Any manuscripts received for review are treated as confidential documents.
8. Performing a review within the set time limit or accepting another solution jointly with ACE in the event of failure to meet this deadline.
9. Notifying the editor if the invited reviewer feels unqualified to review the manuscript or knows that its timely review will be impossible.
10. identifying relevant published work that has not been cited by the authors
11. Not considering evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission.

Author Responsibilities
1. Results of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the manuscript. A paper should contain sufficient detail and references to permit others to replicate the work. Fraudulent or knowingly inaccurate statements constitute unethical behaviour and are unacceptable.
2. The authors should follow the principle of originality, which is submitting only their own original works, and in the case of using the works of other authors, marking them in accordance with the rules of quotation, or obtaining consent for the publication of previously published materials from their owners or administrators;
3. An author should not in general publish manuscripts describing essentially the same research in more than one journal or primary publication. Parallel submission of the same manuscript to more than one journal constitutes unethical publishing behaviour and is unacceptable.
4. Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the reported study and phenomena such as ghostwriting or guest authorship in the event of their detection must be actively counteracted.
5. All authors should report in a Reliable manner the sources they used to create their own study and their inclusion in the attachment bibliography;
6. All those who have made significant contributions should be listed as co-authors. Where there are others who have participated in certain substantive aspects of the research project, they should be named in an Acknowledgement section.
7. The corresponding author should ensure that all appropriate co-authors (according to the above definition) and no inappropriate co-authors are included in the author list of the manuscript, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.
8. All authors should disclose in their manuscript any financial or other substantive conflict of interest that might be construed to influence the results or their interpretation in the manuscript. All sources of financial support for the project should be disclosed.
9. When an author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal’s editor or publisher and cooperate with them to either retract the paper or to publish an appropriate erratum.

Publisher’s Confirmation
In cases of alleged or proven scientific misconduct, fraudulent publication or plagiarism the publisher, in close collaboration with the editors, will take all appropriate measures to clarify the situation and to amend the article in question. This includes the prompt publication of an erratum or, in the most severe cases, the complete retraction of the affected work.

Procedura recenzowania

Manuscript Peer-Review Procedure

”Archives of Civil Engineering” makes sure to provide transparent policies for peer-review, and reviewers have an obligation to conduct reviews in an ethical and accountable manner. There is clear communication between the journal and the reviewers which facilitates consistent, fair, and timely review.

-The model of peer-review is double-blind: the reviewers do not know the names of the authors, and the authors do not know who reviewed their manuscript (but if the research is published reviewers can eventually know the names of the authors). A complete list of reviewers is published in a traditional version of the journal: in-print.
-It is the editor who appoints two reviewers; however, if there are discrepancies in the assessment the third reviewer can be appointed.
-After having accepted to review the manuscript (one-week deadline), the reviewers have approximately 6 weeks to finish the process.
-The paper is published in ACE provided that the reviews are positive. All manuscripts receive grades from 1-5, 5 being positive, 1 negative, the authors receive reviews to read and consider the comments.
-Manuscript evaluations are assigned one of five outcomes: accept without changes, accept after changes suggested by the reviewer, rate manuscript once again after major changes and another review, reject, withdraw.
-Manuscripts requiring minor revision (accept after changes suggested by the reviewer) does not require a second review. All manuscripts receiving a "Rate manuscript once again after major changes and another review " evaluation must be subjected to a second review. Rejected manuscripts are given no further consideration. There are cases when the article can be withdrawn, often upon the request of an author, technical reason (e.g. names of authors are placed in the text, lack of references, or inappropriate structure of the text), or plagiarism.
-The revised version of the manuscript should be uploaded to the Editorial System within six weeks. If the author(s) failed to make satisfactory changes, the manuscript is rejected.
-On acceptance, manuscripts are subject to editorial amendment to suit house style.
-Paper publication requires the author's final approval.
- As soon as the publication appears in print and in electronic forms on the Internet there is no possibility to change the content of the article.

Editor’s responsibilities
-The editor decides whether the paper fulfills all requirements i.e. formal and scientific and which articles submitted to the journal should be published.
-In making these decisions, the editor may be guided by the policies of the journal’s editorial board as well as by legal requirements regarding libel, copyright infringement, and plagiarism.
-The editor maintains the integrity of the academic record, precludes business needs from compromising intellectual and ethical standards, and is always willing to publish corrections, clarifications, retractions, and apologies when needed.
-The editor evaluates manuscripts for intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).
-The editor does not disclose any information about a manuscript under consideration to anyone other than the author(s), reviewers and potential reviewers, and in some instances the editorial board members, as appropriate.

Reviewers' responsibilities
Any manuscripts received for review are treated as confidential documents. They must not be shown to or discussed with others except if authorized by the editor. Privileged information or ideas obtained through peer review is kept confidential and not used for personal advantage Any invited reviewer who feels unqualified to review the manuscript or knows that its timely review will be impossible should immediately notify the editor so that alternative reviewers can be contacted. Reviewers should identify relevant published work that has not been cited by the authors. Any statement that an observation, derivation, or argument had been previously reported should be accompanied by the relevant citation. A reviewer should also call to the editor's attention any substantial similarity or overlap between the manuscript under consideration and any other published data of which they have personal knowledge. Reviewers should not consider evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or institutions connected to the submission. Reviews should be conducted objectively. Personal criticism of the author is unacceptable. Referees should express their views clearly with appropriate supporting arguments. All reviews must be carried out on a special form available in the Editorial System.

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji